How to network AC+AP+ wireless routers?

Connect the AP to the LAN port of TL-R473P-AC through the network cable, log in to the computer to enter the router interface, click AP Management > AP Settings, enable AP Management Function, and select Online AP Device as the display type. The currently online AP will be displayed in the list, and the AP can be managed.

Note: If some APS cannot be found, please confirm that the mode switch of the AP is set to FIT mode, and check whether the network cable between the AP and the router is connected.

2. Set the wireless network of the AP.

Click "AP management >; Wireless network settings ",click+Add to set the host network, as shown below:

3. Add and set up the visitor network again, as shown below:

After the wireless configuration setting is completed, all APS can simultaneously transmit two wireless signals, Zhang San and guest, for the use of the host and visiting guests.