How to install the TV box The most detailed introduction

When it comes to television everyone should be able to see it in daily life, with the increasing level of technology, television from black and white excess to color TV, and then color TV, the initial color TV are some old version of color TV, but now most of the old version of color TV may have been eliminated, and by the new big LCD TV instead, not only can experience a big picture, but also declare to choose a variety of programs, and the old models of the previous television set Relying on the antenna to accept the signal, the signal can only accept to watch some single program, now the big TV rely on the TV box to accept the signal, can accept a lot of programs, I'll introduce you to a few kinds of TV box installation methods.

How to install a TV box

The first step in the installation of the TV box: open the box, take out the set-top box and the following attachments:

1, audio/video cable: a black double-ended cable, the two ends of the line each have three yellow-red-white plug;

2, cable TV subscriber cable: one end is the subscriber male, one end is the British F head;

3, set-top box remote control and with batteries, remote control shape picture see the back.

TV Box Installation Step 2: Wiring

1, put the set-top box next to the TV, put the batteries into the set-top box remote control;

2, turn off the TV switch, remove the original subscriber cable, plug the subscriber cable of the randomly delivered subscriber cable into the wall of the cable TV socket, and the British F-head plugged into the RF or IN socket on the back panel of the set-top box.

3. Insert the yellow, red and white 3-color plugs of one end of the audio/video cable into the 3-color jacks on the back panel of the set-top box according to the color, and insert the yellow, red and white 3-color plugs of the other end also according to the color according to the color into the 3-color AV?IN jacks on the back of the TV set, yellow: Video VIDEO, red and white: Left and Right Audio AUDIO. There are several sets of 3-color jacks on the back of the TV, just select the one that is free in the video input group IN.

TV Box Installation Step 3: Debugging

1. Insert the smart card microchip face down into the set-top box slot in the direction indicated by the arrow;

2. Plug in the set-top box power supply, open the power switch on the front panel of the set-top box, so that the set-top box is in the power-on state;

3. Turn on the TV set Press the AV mode switch button on the remote control of the TV set to switch the TV screen to the AV interface of the corresponding interface.

If there are several sets of 3-color AV jacks on the back of the TV, it means that there are several AV channels on the TV, and you need to continue to press this button until the start-up screen of the digital TV is displayed. If the screen shows "No purchase" or "No authorization" but you have actually purchased the program, please wait for a few minutes for the smart card of the digital TV set-top box to receive the authorization automatically.

The fourth step of the TV box installation: the use of the remote control learning button

The set-top box remote control adds a learning button area on the key panel, and the learning operation between the two remotes requires that the TV and the set-top box remotes are horizontally facing each other, and that the direction of the infrared code sending and receiving becomes a straight line, with a distance of about 3 cm between the two devices. The distance between the two devices is about 3 centimeters.

1. Press and hold the Setup button for more than 3 seconds, and the LED on the top of the remote control of the set-top box will turn from dark to bright and stay on permanently.

2. Press the key you want to learn from the set-top box remote control once and then release it, the LED on the top end of the set-top box remote control will start to flash.

3. Next, point the TV remote control's learned button to the set-top box remote control's transmitter tube (the white tube located in the middle of the top of the remote control) and press the button without releasing it, until the LED on the top end of the set-top box remote control blinks three times, which means that the signal has been received and the function of the button has been learned.

4. Continue to operate according to the beginning of step 2, after learning the rest of the keys and then press the learning setup button, the red indicator light will go out, you can work normally.

TV Box Channel Setup

1, turn on the TV and digital TV set-top box, press the program menu on the remote control, the TV will show the menu screen;

2, then press the F1 menu key on the remote control, and after that, it enters the channel management interface;

3, in the TV set In the channel management interface, press the F4 key on the remote control to select the corresponding TV interface to move;

4, the direction keys on the TV remote control can adjust the order on the TV.

5, after determining the position of the program, ? Then press the F4 key to cancel the "move", and finally press the F3 key to lock the channel position.

TV Box Maintenance

1, in the maintenance and maintenance of digital TV set-top box, you need to turn off the digital TV set-top box, to avoid electrocution in the cleanup process, generally in the maintenance of the digital TV hard disk player, including wiping dust, charging maintenance.

2, the hard disk player of digital TV set-top box mainly uses magnetic media, so you need to use its principle magnetic field in the process, to prevent the hard disk from being magnetized in the process of use, resulting in data loss.

3, in the process of use, but also need to pay attention to waterproof moisture, digital TV set-top box hard disk player once moisture, will lead to the phenomenon of short-circuit inside.

4, hard disk player should not be used in a high temperature environment, in a high temperature environment, high temperature will make the crystal frequency in the hard disk changes.

Through the introduction of these installation methods estimate that you should be familiar with the installation of the TV box and familiar with it, and do not have to worry about the installation, there are many TV boxes, the use of the box to watch TV has become a new trend, I believe that we should know how to install it, sometimes the box should come with a manual, but some manuals can not detail how to Installation, then all of a sudden let the consumer confusion, buy back to see the matter of Ming or not installed, then the mood is not comfortable, so do not have to worry about it, I bring you a detailed introduction.

Tubarabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free~