Please ask how to adjust the neck of the folk guitar

1. Put the guitar in front of you, facing right. If the neck is bent to the right and the center is concave, turn the hexagonal cutter in the direction of the first string to make the neck straight.

2. If the neck is bent to the left and the center is raised, turn the hexagonal cutter towards the sixth string and make the neck straight.

3. If the neck is straight and the strings are too high, remove the lower saddle and twist the strings to take it down, then use sandpaper to polish the lower part of the saddle to a certain degree and put it on. Don't sand too much, or you can only change the pillow again. The distance between the strings and the neck is 5 to 6mm.

4. When the upper part of the neck hits the product, you can add a small piece of paper in the gap of the upper pillow of the product strings, if you can't solve the problem, that is, the problem of the product column, you can use sandpaper to gently polish it until it doesn't hit the product.

Note:

Sanding should be done carefully, and do not overdo it.

Note:

Be careful not to overdo it.