How to image film yourself

If you manually develop the film, then it is safer to develop black-and-white, color rolls of potion with highly toxic substances, usually sent to the printing store with automatic development. There is no darkroom does not matter, now with a dark bag and barrel can be developed in broad daylight. Wrote a simple development process:

Required items:

1. dark bag (darkroom is better of course) 2. with the core of the developing tank 3. developer, stopping solution, fixing solution (beginner, if you buy a direct configuration of the good) 4. meter clock 5. scissors 6. clip (hanging film with) 7. thermometer 8. measuring cup

process:

Refinition process:

1. Dark bag to roll the film into the core into the development tank. 2. According to the instructions for the use of developer solution ratio with water in the measuring cup configuration (if the powder is also refer to the instructions), and then poured into the development tank. Timing (according to the instructions) and stirring.3. Timing end, pour out the developer and then pour in the stop solution to stop the shadow.4. Pour out the stop solution and pour in the fixing solution.5. Pour out the fixing solution and rinse with water.6. Hang to dry, and use a sponge or a negative scraper to wipe the water on the film.

Simply put, this is the case, a lot of practice is still needed to gain experience, such as film imaging hard and soft can be resolved by changing the rinse time, stirring times.