Introduction to installation of household radiator

The installation of household radiators requires professional skills, but if you have some DIY experience, you can also do it yourself. This article will provide you with a complete guide to the installation of household radiators to help you complete this work better.

Preparatory work/about to start work

Before installing the household radiator, you need to prepare some materials and tools, including upper and lower line alignment, water return tank, exhaust nozzle, paper gasket, oil hemp line, steam water valve, zinc pipe, etc. In addition, auxiliary tools such as pipe tongs and wrenches are needed.

Installation skills of cast iron radiator

The installation of cast iron radiator needs to pay attention to some special places. There are two interfaces between every two radiators, which need to be connected by external short circuit. This kind of external short circuit is provided by the manufacturer, and the inner hole is a rectangle with circular arcs at both ends, which needs to be installed with a special wrench. After installation, pressure test must be carried out to ensure safety.

Installation step

The steps of installing a household radiator are relatively simple. First of all, it is necessary to install the upper and lower pairs of wires between the two radiators, and tighten the two pairs of wires with special tools. Then, after arranging the upper and lower alignment, put a household radiator and tighten the alignment. Repeat this step until the installation is complete.