How to add lubricant to the steering column

How to add lubricant to the steering column:

1. Remove the two dust covers on the steering gear tie rods, grease the steering gear teeth, and then drive back and forth to get the lubricant into the steering gear for lubrication. When changing the lubricant, hit the car first and use the oil pump to suck up the old oil;

2. Inject new lubricant, then turn the steering wheel back and forth to allow the new oil to penetrate, which also serves as a cleansing agent. In order to penetrate thoroughly, it is best to turn the direction left and right drastically, and then turn the direction left and right slightly;

3. The purpose of beating the steering wheel back and forth is to discharge the old oil in the steering gear, but don't beat the steering wheel to death for a long time, or else the oil pressure is too large, and it will spurt out the steering oil;

4. Suck the oil in the booster oil tank once again, and then fill in the new lubricant, and then beat the steering wheel;

5. p>5. The purpose of this repetition is to ensure that the old oil is completely removed. Then fill with new oil. It must not be mixed with any petroleum products;

6. When driving, you will hear a slight sound. This is the oil circulating and will slowly return to silence. Do not leave the car empty for a long time or you will damage the booster pump.

Millions of subsidies for car purchases