How to sew hand-pleated lace?

1, cut the cloth into two pieces, the main cloth is square, and the longer one is used for lace.

2, the length can be 2-3 times that of the main cloth, the specific length depends on the degree of wrinkles (you know, the more wrinkles, the longer the required length) First, lock the edge of the pleated cloth.

3. Fold the burr inward, fold it again, fix it with a locating pin, and press it with an iron.

4. After ironing, sew the edges with a sewing machine.

5. When sewing, remove the locating pin at the same time to ensure that it will not shift.

6. Just now, the burr on the reverse side of the hem was installed.

7. At this time, select the empty sleeve of the sewing machine to facilitate subsequent drawing.

8. Take two lines from the burr 1- 1.5cm, and the distance between the two lines is about 0.5cm.

9. Fix two pieces of cloth together with a pin and align the side seams. Pull the pipe on the other side (not the side of the needle) around one side of the needle twice to make it fold evenly, adjust the folds, make the final length of the folds the same as that of the cloth below, and evenly distribute and fix the needle.

10 Sew two pieces of cloth together. This route is still the same as before. Turn around and iron the main cloth slightly to avoid wrinkles.