It takes five steps to install the ceiling lamp belt, and the master shared his experience.

Ceiling light bar is a common type of lamps in modern families, which can effectively set off the environmental atmosphere in a certain period of time, so it is very popular with some young owners. So, how is this ceiling light bar installed? Below, take you to understand the romantic installation steps of ceiling light bar. Come and find out!

First, determine the length of the light strip.

The first step is to determine the length of the customized wooden door, and then select interception according to the length. Because the LED custom wooden door is usually 1m as a unit, it can only be cut from the beginning of cutting, otherwise it will affect the entire custom wooden door circuit, resulting in the result that the custom wooden door of this unit is not bright. If the actual quantity is 7.2 meters and the length is 0, buy 8 meters.

Second, pay attention to connecting the plug.

Because the LED custom wooden door itself is a diode, a DC driver, with both sides. If the front and back sides are connected when connecting, the customized wooden door is insulated. Custom wooden door is not bright. In practice, the custom wooden door is not bright, which can be solved by reopening it to the other end.

Third, the placement of light strips.

Because when unpacking, the LED custom wooden door is put in the bag, so there is a place that will bend and not be flat, and the custom wooden door is single-sided. If you don't pay attention to installation, the light source will be different. So before installation, please arrange the custom wooden door first. Please note that the lighting part faces outwards, and then put it into the lamp slot.

Fourth, use the lamp clip.

In order to make the installation smoother, there are clips specially for installing custom wooden doors on the market. Known as the custom wooden door companion, adding the custom wooden door can solve the problem of corner and bending, improve the installation speed and make the custom wooden door better used.

Verb (abbreviation of verb) installation details

Custom wooden doors can be placed in any position, but they must be flat, otherwise the brightness is unnatural and dark; The ceiling slots suitable for custom wooden doors are divided into female slots and male slots. You can't see the wall of the mother trough, and the male trough goes to the center of the ceiling, which is intuitive and you will know when you see it. When installing, you need to put the custom wooden door into the light trough, which comes from the end plate of the power cord.

The above five points are the installation steps of the light strip. Does it look simple? But we remind non-professionals not to try to install it by themselves, which involves the safety of electricity use. It is best to ask a professional master to install it at home to ensure the installation quality.