How to draw a digger simple drawing

Excavator simple drawing method is as follows:

1, first take out the A4 paper will be laid flat, the thick end of the black outlining pen in the middle of the paper in the lower part of the position of the wheels to set the position. First draw an oval on the long side, then draw the round wheel inside.

2. After the wheel is drawn, draw two small vertical lines above the oval. Draw the excavator's carriage above the vertical lines, with the tail of the carriage shaped close to a rectangle and a pointed triangle at the head.

3. After the carriage is drawn, decorate its tail and draw the excavator's gate at the head of the carriage.

4, after the excavator's carriage is drawn, you have to draw its boom, according to the angle you need to freely adjust its position, do not forget to draw nails on the boom.

5, and finally just draw the digging shovel at the end of the good, in the digging shovel at the top of the drawing of the protruding a little part of the more realistic look.

Digging machine is short for excavator, is the bucket digging above or below the surface of the bearer of the material, and loaded into the transportation vehicle or unloaded to the stockpile of earth moving machinery.