Belt conveyor roller covering rubber covering layer has those kinds of, need to provide manufacturers, manufacturers need to have safety standard?

Equipment for a long time during the operation of time, there will be normal or unexpected wear and tear, aging and other problems, resulting in failure, directly affecting the normal operation of production. Various industrial and mining enterprises are actively looking for fast, efficient and reliable equipment repair and maintenance technology.

Roller cover

It is used to increase the friction conductor between the conveyor belt and the cylinder surface during transmission to reduce the friction coefficient of the conveyor belt on the surface of the cylinder in order to reduce the conveyor belt on the surface of the cylinder sliding machine mutual abrasion, improve the traction of the operation, and prolong the service life of conveyor belts and motorized pulleys. There are basically three methods: hot vulcanization, cold bonding (without vulcanization), wear-resistant ceramics. Only the first two. The main process difference is: hot vulcanization process is, the barrel skin in the lathe turning about 2-3mm deep threaded grooves, brush two layers of adhesive (iron adhesive, rubber adhesive), and then the raw rubber plate compression of the drum barrel skin, into the vulcanization steam furnace heated to 180 ℃ vulcanization, vulcanization is completed out of the lathe after turning on the rubber coating pattern.

Mainly:

Reverse roller

Reverse roller only as a guide to the conveyor belt to change the direction of the cylindrical cylinder. Reversing roller does not bear the torque, the structure is relatively simple. Drive roller and drive device connected, is the most important part of the belt conveyor, the friction coefficient between the surface of the drive roller and the conveyor belt and conveyor belt in the roller on the wrap angle drive to change the power.

Drive roller

Surface using diamond and herringbone pattern rubber, mainly used, diamond-shaped rubber surface for bidirectional operation of the conveyor. Rhombus pattern rubber surface friction coefficient is large, non-slip and good drainage. The roller produced by our factory adopts cold covered rubber sheet, which has longer service life and better abrasion resistance.

Imported super wear-resistant roller cover rubber (linard60)

The traditional hot vulcanized rubber covered roller due to the low vulcanization pressure, high sulfur content and poor wear resistance, easy to aging in use. The result is a decline in adhesion to the conveyor belt and poor cleaning function. My company's roller covering rubber solves this problem, its materials are: wear-resistant anti-slip rubber sheet, flame retardant rubber sheet, flame retardant anti-static rubber sheet, imported super wear-resistant rubber sheet. Choose the right rubber sheet for you, use the matching glue, and use the unique cold gluing process to ensure the quality and stability of use. Features:

1. Dense material, good elasticity, high coefficient of friction.

2. high abrasion resistance,

3. tensile and tear resistance,

4. customized, strong and reliable, longer service life. Mainly used in the outer body of the roller covering rubber, according to different roller size and technical requirements, customized processing diamond pattern or herringbone pattern, in order to increase the surface friction of the rubber plate, reduce belt slippage, improve operational efficiency. We have both imported and domestic exported wear-resistant rubber sheets for choice. Contracting on-site roller cold wrapping rubber and belt lap, tear scratch repair and other businesses, and provide free technical programs and on-site technical guidance.

Flat roller cold wrapping rubber

Protect the surface of the roller from adhering to the transportation material and avoid running

Increase the sliding friction coefficient, thus reducing the slippage between the roller and the conveyor belt, according to the different specifications and technical requirements provided by the customer, can be processed.

Rhombic cold covered rubber roller

Rhombic wear-resistant non-slip rubber plate for cold covered rubber roller has high abrasion resistance, tensile strength and tear resistance. With metal pretreatment agent and cold vulcanization two-component flame retardant room temperature fast curing adhesive use, can greatly improve the roller and adhesive plate adhesive force, and simplify the surface treatment procedures of the rubber plate, directly coated with glue use. It can be customized according to different roller sizes and technical requirements, with prefabricated lap joints to facilitate on-site construction.

Rhombic cold gluing roller features:

Protect the surface of the roller from adhering to the material and avoid running

Increase the coefficient of sliding friction, thus reducing the slippage between the roller and the conveyor belt

Protect the roller from wear and corrosion

High-strength textile belts and steel cable conveyor belts

Suitable for all kinds of driving rollers

This is the first time to use this kind of roller in the industry, which has been used in the industry for many years.