Ceramic jewelry production process introduction

Ceramic jewelry, as the name suggests, is made of ceramic materials through a variety of processes to create a novel jewelry, both the shape and glaze represent a new artistic image, even if worn on the body of the human body also has a lot of benefits, therefore, ceramic jewelry had been regarded as a new type of green jewelry. Next, I will give you a detailed introduction to the ceramic jewelry production process.

To make ceramic jewelry, the first step is to take porcelain stone. Generally we are from the mining area to quarry porcelain stone, first of all, we need to use artificial hammer to break the ore into egg-sized shapes, and then pounded with a water pestle and pounded into powder, after washing and removing the internal impurities, the precipitation of the porcelain stone made of brick-like mud blocks. The next step is to blend the clay lumps with water, remove the slag quality and knead them repeatedly with hands or feet until the air in the clay lumps is squeezed out and the moisture is even. Then we have to make the ceramic jewelry with plaster molds according to the shape of the ceramic jewelry, according to the molds to make the shape we need, in general, most of the jewelry is through the strength to change the shape of the clay, so that the clay is transformed into the same shape as the molds, but if we want to make hollow necklace jewelry, this molding method does not apply, we need to import the mud into the molds to build up and finally We need to import the clay into the mold and build it up to get the shape we want.

The next step is to carve out the specific shape of each piece of jewelry with a knife on the basis of the original, whether it is carved with a knife or burned, to create jewelry will be relatively rough, looks quite unattractive, even if it is worn on the human body, it may also cause harm to the human body, so we need to carve out a good piece of jewelry to further sanding with gauze, making the jewelry more round and smooth Until. Then we have to ceramic jewelry bad body to air dry, general ceramic bad body to go through charcoal drying, anthracite heating drying, smokeless boiler steam drying and kiln drying and so on four stages, but in the production of ceramic trinkets, we only need to put the bad body on a wooden frame can be naturally air-dried. Wait until the bad body dry, we have to carve on its surface, generally with bamboo, bone or iron knives for carving, because it is purely handmade, which means that each ceramic jewelry will have a subtle difference, but this happens to be also into each ceramic jewelry with a unique flavor.

The last thing is to glaze the ceramics, because the glaze is not stable, it is particularly strong fluidity, in the process of high temperature firing may flow down, if the glaze water flow traces, then the jewelry will fail, so we have to scrape around the jewelry after glazing to ensure that the glaze will not flow down. The next step is to fire the ceramic jewelry, which is usually done by placing the ceramic item into a roasting container to avoid contact between the ceramic jewelry and the kiln fire and thus contamination. When the kiln is fired for about a day and a night, it can be stopped. Finally, we then painted ceramic jewelry, painted after the good but also into the red furnace for low-temperature baking, so as to ensure that the color of ceramic jewelry never fade.

The above is the ceramic jewelry production process that I introduced to you. Isn't it very exciting? The heart is not as good as action, quickly according to the editor brought the production process to make a beautiful ceramic jewelry it!

Tubapu online free for everyone to provide "home decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it free of charge~