Method of manufacturing a ship

The making method of the homemade boat is as follows:

Prepare a number of chopsticks and stick them as shown.

2. Then prepare several chopsticks with different lengths and stick them as shown in the figure.

3. Glue the three pieces together.

4. Prepare the materials in the picture.

5. Glue as shown in the figure.

6. Stick two pieces inside the hull as shown in the figure.

7. Then glue two paddles, as shown in the figure.

The finished product is shown in the figure.

Second,

1. Fold the rectangular colored paper in half along the center line of the wide side.

2. Fold the two corners of the hem along the dotted line to align with the center line.

3. The particularly narrow side on the top is folded down along the dotted line, and the reverse side is also folded down.

4. Open the cavity in the middle, hold the optical fiber at two corners and push it back.

5. The whole triangle becomes a square skin collapse.

6. Fold the two corners separated from each other in half along the dotted line.

7. The whole has become a triangle again. Pay attention to the position of the logo, open the middle and push the two corners back.

8. After forming a square, pull out two petals in the upper corner of the circle and turn up the lower corner.

9. After completion, the paper boat is folded.

Third,

1. Fold two pairs of corresponding corners of a square piece of paper in half, and then unfold it to get the central crease of the square piece of paper.

2. Fold all four corners of the square to the middle.

3. Fold four corners, and then unfold them to get four creases. Fold the four corners inward twice as shown in the figure, and finally form the shape shown in the figure below.

4. fold in half.

5. Fold in the direction indicated by the arrow, and also fold the lower side.

6. We can see that there are four small right-angled triangles on this picture, and then fold these four small triangle rows forward along their hypotenuse. According to the steps in the figure, fold the shaded part marked with black pen in half up and on both sides, and finally get the figure.

7. Pick up the origami, open the upper part, turn both sides outward in the direction of the arrow, and turn all the inside out at the same time.

8. After a little tidying up, you can get the shape in the above picture, and the ship has begun to look like it. Then, two triangular pieces of paper painted with X were supported as the shed of Wu Peng's boat.