How to Upgrade Firmware of Solid State Disk

1. Download the firmware patch from SSD official website, decompress it into an IOS image file, and then make a startup disk with universal USB installation software.

2. Select the write type in the first step option, and then select Try Unlisted Linux ISO (Old syslinux).

3. Add the ISO file to be started, as shown in the second compressed package on the desktop. Select a file location different from the storage location, click "Create" after adding it to start making the startup disk, and if prompted, keep clicking Next.

4. After the startup disk is made, restart the computer and select USB startup mode to start the firmware update operation.

Remember to set the hard disk to ide mode in BIOS settings before starting the USB flash drive. After restarting, press del or F2 to select the startup mode.

5. The firmware program will run automatically. When prompted whether to change the program, enter "Yes" to complete the operation.

The firmware of the main control chip is very important for SSD, which controls the algorithm of reading, writing and transmission. The new version of firmware may improve the performance of SSD or add new functions (such as TRIM), so it is necessary to upgrade the firmware.

Extended data:

The method of upgrading hard disk firmware version to solve notebook firmware door;

1. Prepare a USB flash drive or SD memory card. If there is a built-in DVD burner, disassemble the machine when it is turned off, unplug the power cord of the built-in DVD burner, install the machine and start it, and insert the U disk or SD memory card into the notebook.

2. Run the USBboot tool, select the U disk logo, select the HDD mode, click the Start button, and then make the startup U disk (or SD card) according to the prompt, and copy the LV5D firmware file to the root directory of the SD memory card.

3. Restart the notebook, press F2 to enter the BIOS setup interface, set the startup sequence as USB HDD, use the USB flash drive to boot into DOS mode, execute the AT.bat command and press Enter, and then start to brush the hard disk firmware.

4. After upgrading the firmware, the sound management function will be automatically blocked, so the working noise of the hard disk will increase. At this time, the mute mode can be turned on by software.

Take high-definition tuning software as an example. After running, switch to AAM settings page, select the enabled check box, and adjust the noise level as needed.