How to ink the printer cartridge?

The steps to add toner to the printer are as follows:

Equipment: HP z6 printer

1. After confirming that the printer has no black powder, you need to take out the toner cartridge of the printer, as shown in the following figure:

2. After taking out the toner cartridge, take it out of the toner cartridge and press the green button on the left to separate it.

3. Take the newly bought powder box out of the package and shake it horizontally several times, mainly to shake the powder in the box evenly.

4. Then remove the yellow plastic cover in front of the new compact.

5. Put the new compact into the original drum box and gently press it until the green card on the left side is stuck.

6. Install the installed toner cartridge into the printer as a whole. The installation method is just the opposite of the disassembly method.

7. After installation, close the front cover, and then turn on the printer for system testing. After the test is successful, the green light that the printer is ready will light up. It indicates that the installation is complete and can be used.