How to make a simple woodworking plane?

The manufacturing method of simple woodworking planer is as follows:

1. The materials needed to make wooden spatula include wood, spatula, screws and nuts. Choose wood with moderate hardness and hard texture as the material of aircraft, such as cherry wood and oak. The choice of planer should be determined according to the required planing effect.

2. Saw the selected wood into a rectangle of suitable size, which is about twice as long as the blade of the planer. Then, use a chisel to make both sides of the wood into smooth and flat surfaces, so as to ensure that the edges of the planer can be closely attached.

3. At one end of the planer, trim the wood into the shape of a cutting knife with a chisel. Planers are generally V-shaped, so you should tilt the two sides of the wood to the middle. The inclination angle of the wound knife can be adjusted as needed, generally around 30 degrees.

4. Insert the planer into the planer groove of the planer body and fix it with screws and nuts. The selection of screws and nuts should be suitable for the thickness of wood, so that the spatula can be firmly fixed on the spatula.

5. Place the fixed planer on a flat workbench, and adjust the angle of the planer so that it is in vertical contact with the workbench. This can ensure that the planed sawdust is uniform and the planing effect is better.

6. Put the wood to be planed on the workbench, hold the planer body by hand, and push and pull the planer hard along the grain direction. The cutting effect of planer depends on the sharpness and cutting strength of cutter, which needs to be adjusted according to the actual situation.

7. Clean the sawdust and dust on the leaves of Chuangzi in time after use, so as not to damage Chuangzi. The blade of the chisel should be kept sharp, and the planer should be regularly polished with sandpaper or grindstone to ensure the cutting effect.

Precautions:

When processing planers and planers, you need to use professional tools, such as woodworking planers and files. While keeping both hands stable, measure the dimensions with a measuring tool to ensure that the shape and dimensions of the planer and planer meet the requirements. Finally, the planer is assembled to the planer, and the final polishing and lubrication treatment are carried out to ensure that the woodworking planer can be used more smoothly and efficiently.

In a word, making a woodworking plane requires rich woodworking skills and patience, but it is also an interesting and fulfilling handicraft. If you are good at carpentry, being a carpenter planer will be a good exercise opportunity, and it can also improve the efficiency and quality of your woodworking.