What insulation materials used in buildings in the past

The insulation materials used for buildings are as follows:

1. Roof insulation materials: 1:8 cement aerated concrete slag, 1:10 lime slag, 1:8 cement slag, 1:1:10 cement lime slag, 1:8 cement perlite, 1:8 cement vermiculite, foam concrete, aerated concrete, asphalt perlite blocks, cement vermiculite blocks, asphalt glass wool felt, asphalt slag cotton felt, dry laid 30mm thick polystyrene foam board, spot glued 30mm thick polystyrene foam board, CCP thermal insulation composite board, asphalt cork, dry laid perlite, dry laid vermiculite, and so on.

2, canopy insulation materials: bags of glass wool, polystyrene boards, concrete boards under the cork board, concrete boards under the paste resin perlite boards.

3, wall insulation materials: wall paste cork board, wall paste polystyrene foam board, wall paste 100mm thick aerated concrete block, wall paste 100mm thick asphalt perlite board, wall paste 100mm thick cement perlite board, bagged glass wool, thick 5+12+3 (mm) polyurethane foam, thick 20+5 (mm) aluminum silicate composite thermal insulation slurry, polystyrene panel External wall surface insulation, glue powder polystyrene particles external wall surface insulation, etc..

4, column surface insulation materials: package cork board, package polystyrene foam board and so on.

5, floor insulation materials: cork board, polystyrene foam board, 100mm thick aerated concrete block

The need for special instructions: different parts of the material used, there will be differences. The same material, used in different parts of the construction process is different, can not be operated in accordance with the same construction process. Specific construction requirements, in accordance with the provisions of the current construction acceptance specification.