How to remove the plastic-steel window and how to replace the glass for the plastic-steel window

Disassembly steps of plastic steel window:?

1, remove the screen window. Push the screen window up hard, and the bottom of the screen window will be off the track, and then the screen window can be taken down.

2. Remove the lock and windproof block of the push-pull fan. To remove the push-pull fan, you need to remove the side hook lock with a screwdriver first. Look at the plastic-steel window frame and see if there is a windbreak. If there is, it needs to be removed first.

3. Remove the cover on the push-pull fan. The cover is on the vertical material of the push-pull fan. It needs to be pried open from the bottom up with a screwdriver, and then it comes down by hand.

4. After removing the cover, push the sliding window upward to remove it.

5. Remove the screws on the window frame. The window frame is fixed on the hole, and it is fixed with screws up and down, left and right. All the screws need to be removed.

6. Cut off all the glue in the window frame with a utility knife. When the plastic steel window is installed, the window frame is coated with sealant or foaming agent, so when it is removed, all the parts connected with the window frame should be cut and separated with a utility knife before the window frame can be removed.

7. Remove the window frame. After the fixing screws on the window frame are separated from the glue, the whole window frame can be taken down smoothly.