Simple handicraft production process

The simple production proces of that handicraft is as follows:

1. Make a chassis, rectangular or square. The house is as big as it wants, and the length must be the same. Stick it tight with 502, stick it tight.

2. To make the wall of a house, first make the front and back, but one side should be made in half, because to make a door, the specific shape is like an old house, and the height of both sides should be the same, otherwise the roof will be high on one side and low on the other.

The next step is to make two walls. Stick the wall made in front first, and then stick it from both sides. As for the specific width, I feel that it is appropriate and highly consistent.

4, the roof, it is a bit complicated to do, and the angle of the roof should be the same as the angle of the wall made before, so that you can just put it up, as shown in the figure, but don't remember to stick it up first, because there is a door in front.

5. As the picture shows, the front wall is like this. As for the shape of the door, do whatever you like, and then put up the roof, and you're done. If you want to add something, just add it yourself. A simple little house is like this.

The above is the simple process of making handicrafts.