What is the installation direction of woodworking saw blade and the rotation direction of saw?

The rotating direction of the saw blade should be consistent with the direction marked by the machine body. Seen from the front, the cutting blade rotates clockwise, and the rotating direction of the blade is consistent with the direction marked on the fuselage. The machine is held in the right hand, so cutting wood should be pushed from near to far. Cutting wood larger than the radius of the saw blade can not be cut at one time, but it can be cut many times.

note:

Make sure that the direction pointed by the saw blade is consistent with the rotating direction of the saw blade (the arrow on the saw blade should point in the same direction as the arrow on the circular saw). One side of the inner platen boss has a diameter of 30mm, while the other side has a diameter of 20mm. According to the aperture of the saw blade you want to use, use the correct side. Improper installation may lead to dangerous vibration.

Extended data:

The left and right teeth are widely used, with fast cutting speed and relatively simple grinding. Suitable for cutting and crosscutting all kinds of soft and hard solid wood profiles, density boards, multi-layer boards, particleboard and so on. The left and right teeth with anti-rebound protection teeth are dovetail teeth, which are suitable for longitudinal cutting of various plates with tree joints; The left and right tooth saw blades with negative rake angle are usually used for sawing veneers because of their sharp teeth and good sawing quality.

The flat tooth saw is rough, slow in cutting speed and the simplest in grinding. Mainly used for sawing ordinary wood, with low cost, mostly used for aluminum saw blades with smaller diameter to reduce adhesion during cutting, or used for grooving saw blades to keep the groove bottom flat.

Baidu encyclopedia-saw blade