Solidworks how to model a propeller?sw How to model a propeller?

SolidWorks is a very practical and efficient mechanical CAM, CAE analysis aids, with a very intuitive 3D development environment, can help users easily design and manufacture a variety of complex products, SolidWorks software also has an engineering analysis and preparation system, so that you can give full play to the productivity of the design and manufacturing resources, which can be faster and more economical to create better products. SolidWorks software also has an engineering analysis and preparation system that allows you to take full advantage of the productivity of design and manufacturing resources so that you can create better products faster and more economically. How to quickly learn the use of solidworks? There are high-quality sw video tutorials specially prepared for partners with zero foundation, no knowledge or slight understanding of solidworks. Want to have a comprehensive understanding of solidworks understanding and want to learn how to use sw drawing students, come to the right place.

Solidworks popular video tutorials recommended:

Solidworks Mechanical Design: Introduction to Mastery Course

Interior Design: Solidworks Engineering Drawing Design Tutorials

Introduction to Solidworks: Solidworks Measurement Tools

This is a great way to get started with solidworks and to learn how to use it. The following step into the main topic:

1, draw the center axis, define the inner diameter and outer diameter

2, cam - stretch, symmetrical on both sides, the height should not be too high, temporarily set the height of 18.52

3, the creation of the datum plane 1, and the distance from the front view of the datum plane 5mm, the creation of the datum plane 2, and the distance from the front view of the datum plane 50mm

4, in the datum plane 2, draw the Spline curve in the shape of the following figure, note: the upper and lower points must be on the end of the cylinder, the size can be set according to the actual need

5, with the Insert-Curve-Combination Curve command will be two spline curves into one, the combination of the two into one in order to release the sample of the step is quite critical

6, in the datum 1, the outline of the following figure, the top and bottom of the two points must be in the straight line at both ends of the cylinder

7, create datum 1, with the front view datum distance of 5mm, create datum 2, with the front view datum distance of 50mm

7, in the cylinder at both ends of the datum were drawn in the following figure sample curve, sample curve ends were drawn with the 5, 6 steps of the outline of the sample curve

8, the use of the boundary curve command, click on OK

9, the cylinder as the center of the creation of the reference axis, and the implementation of the circumference of the array command

10, stretching the excision, will be rounded to the edge

11, the use of rounded corners command to change the edge

11, use the rounded corners of the propeller root command to implement the reinforcement

12, add details and color to complete

Want to be skilled in the use of solidworks to do drawings, but also more video tutorials to watch, do more exercises, have questions to ask the teacher, but also more exchanges with classmates so that mastery of the fast, only solid. Finally, I wish every student to learn solidworks as soon as possible, and present the latest sw video tutorials: