China Traditional Woodworking Craft Speaker

.. 1.5 inch speakers have good treble, and the bass frequency is about 60-70HZ. No matter what the speaker does, the bass frequency is only that frequency. Such a pair of speakers, listening to songs is better, listening to light music and low-pitched strings is also good.

2. If you want the speakers to be used in a wider range-not only listening to songs and light music, but also listening to symphonic music and electronic music, watching movies and playing games. . You need to raise the subwoofer below 60-70HZ and make a subwoofer with 10-inch speakers. The volume of the speaker needs to be higher. You can check the volume of the 10 inch speaker. If the volume is too low, the bass cannot dive to the lowest frequency.

3. The dimensions of your 5-inch speaker are roughly as follows: height 36 cm, width 24 cm and depth 32cm；; The inverter tube is 5-7cm in diameter and 6 6- 10/0cm in length; The speaker material can be 12MM wood plywood (two 6MM layers can be bonded into one layer to achieve the required thickness).

4. Buy a pair of 2-partition boards on TB. When installing the speaker, pay attention to the fact that the two wires must be different colors, namely red and black. If you don't distinguish between colors, you are more likely to make mistakes. As long as the speaker wiring of one speaker is different from that of another speaker, the sound from this speaker will be very strange and the bass will be much weaker.