Installation steps and precautions of glass ceiling

Firstly, install a common 9mm joinery board with the same glue on it, put glass glue and double-sided adhesive on the glass, and stick it according to the picture; Two: use joinery board or stainless steel pressing plate to shape, put the glass on it, and use joinery board or stainless steel strip as pressing strip to fasten the glass. For safety reasons, glass glue can be coated before the buckle; Third, fix the installation with the method of fixing the mirror nail. This suggestion is for a cell pattern.

Matters needing attention

Four. Precautions for glass ceiling installation: the bottom plate should be laid before installation. Glass ceiling has a common feature, that is, to lay the bottom plate. Generally, 9mm blockboard and plywood should be treated with corrosion protection and fire prevention. Before installing the glass plate, all exposed welds must be painted with antirust paint. The contact surface between the wooden skeleton and the structure should be treated with anti-corrosion, the keel does not need adhesive, and it needs to be painted with fire retardant coating for 2 ~ 3 degrees.