Mrs. Fang, how to disassemble and develop the pictures of the side-suction range hood?

1. Side-suction range hood adopts snap-in installation mode, which is convenient for disassembly. First, hold down the hood panel with both hands and pull it down.

2. After that, loosen the filter clip connected to the range hood panel, so that the range hood panel can be removed.

3. After removing the panel, you can see the filter screen. Remove the filter screen on the side range hood and you will see the fan.

Extended data:

Basic knowledge of maintenance:

1, the installation height of the range hood must be appropriate, so as to ensure the nonconformity and the smoke exhaust effect.

2. To avoid excessive noise or vibration, oil dripping and oil leakage. Range hood, we should clean the range hood regularly to avoid too much oil sticking to the inner surface of the motor, turbine and range hood.

3. Keep the air circulation in the kitchen when using the range hood to prevent the air in the kitchen from forming negative pressure and ensure the suction of the range hood.

4. Consumers are advised not to disassemble the range hood for cleaning without authorization, because once the motor is not installed, the smoking effect cannot be guaranteed and the noise will increase; It's best to let the manufacturer's professionals clean it.