How do you measure the size of the house when you decorate it?

1, tour all rooms to understand the basic room structure.

2. Draw a rough plane on the paper.

3. Start measuring room by room from the entrance, and record every data measured to the corresponding position on the plane.

4. Specific measurement methods

Measure the length and height of the room with a tape measure (the length should be measured near the ground and the height should be measured near the corner). After re-measurement, record the specific size leading to another room (clearly understand the structure between the two rooms).

Observe whether there are doors, windows, switches, sockets and pipes around the wall. If there is, just indicate it on the paper. Measure the length, width and height of the door itself, then measure the left and right distance between the door and the wall, and measure the distance between the door and the ceiling.

Measure the length, width and height of the window itself, and then measure the left and right spacing of the wall to which the window belongs, the spacing between the window and the ceiling, and the spacing between the window and the ground. According to the measurement method of doors and windows, record the dimensions of switches, sockets and pipes. Pay special attention to the kitchen and bathroom.

Extended data:

Measure the function of the house:

1. First of all, we can clearly understand the specific size data of the house. Through the measurement of rooms, we can accurately determine the specific length, width and height of each room in the room, as well as the specific installation orientation of doors, windows, air conditioners and cabinets, which will have a direct impact on the decoration budget.

Secondly, we can know the advantages and disadvantages of the layout of the house. Usually, designers can better grasp the orientation and location of the house and the surrounding environment by measuring the renovated house on the spot.

2. For example, whether the noise is too high, the air quality is good or bad, the lighting effect, etc. These factors have a direct impact on the later design. For example, the layout of some houses or their external environment is not ideal, which can be compensated by design.

3. Furthermore, the quality of the renovated house can be better guaranteed. The more accurate the measurement of the house, the more you can design a good plan close to the house.

For example, heating, sewage, gas and other things will not be completed in the later decoration construction, and some projects can not be completed due to size reasons, so they can only be transformed, which affects the whole decoration effect. If it is not measured first, it is easy to exchange goods and return goods because of the size problems of pots and toilets bought later.