Correct use of Yuba switch

The correct use of Yuba switch is as follows:

1, preheating before use: close the bathroom window and open the yuba for preheating. The preheating time is about 3-5 minutes, and the specific time can be determined according to the size of the bathroom and the model of Yuba.

2. Turn on the Yuba: Before turning on the Yuba, turn on the hair dryer function first, and then turn on Air Warm One and Air Warm Two in turn. Don't turn on the ventilator and Yuba at the same time, so as not to affect the normal work of Yuba.

3. Turn off after use: Turn off the first and second heaters after use, and then turn off the blowing function. You use a Yuba with a wireless remote control switch, which has a delay function and will automatically stop working after cooling for one minute. This is to make the heating block inside Yuba completely dissipate heat and prolong the service life of the machine. You use a Yuba without delay function. You can wait a minute or two for the heat block to cool before turning it off.

4. Turn on the ventilator: After Yuba's heat dissipation is completed, turn on the ventilator in the bathroom to let the water vapor in the bathroom be fully discharged. It is recommended to turn on the ventilator 10 minutes to ensure that the water vapor is completely eliminated. This time can be adjusted according to the specific situation, but it cannot be too short.