How to Adjust the Factory Settings of Skyworth TV (Summary of Various Methods)

Summary of the Methods of Skyworth Color TV Entering and Exiting Factory Mode

Identity card series

5D0 1 movement:

Enter: A button (service button) is installed just below the screen button of the remote controller. Press this button to enter the factory mode.

Exit: Just press the TV/AV button on the remote control.

5D20 movement:

Input: 1. Press the "factory key" on the remote control (a key is installed directly above the computer key) to enter the factory debugging mode;

2. Press "Menu Key" until entering the service factory adjustment menu;

3. Press the "Channel+/-"key to select the item to be initialized;

4. Press the "Volume+/-"key to perform the initialization operation.

Exit: press the "factory key" to exit the debugging menu.

5D25/5D26 movement:

Enter: Press and hold the "Channel+/-"key on the panel at the same time before starting, and press the "Menu" key to turn pages.

Exit: just close it with AC.

5D28 movement:

Enter: (1), press the multi-key "-"to make a "mouth" appear on the screen, and set the hundred digits to 2, regardless of the other two digits. (2) Press the "Menu" key to enter the sound menu and select "Heavy Bass". (3) Enter the password 6879 to enter. Shortcut to enter the adjustment project: press the "1" key to adjust the white balance of TDA 13 16; Press "2" key to adjust OSD；; Press "3" key to adjust EEPROM data; Press "4" key to adjust the rotation setting of CPU; Press "5" key to adjust DPTV1; Press "6" key to adjust DPTV2；; Press "7" key to adjust DPTV；; ; Press the "8" key to adjust TDA1316; Press "9" key to adjust TDA9859；; Press the "0" key to adjust TDA9 1 12.

Exit: press the "standby" key to exit.

5D30 movement:

Enter: press the "screen display key" on the remote control, and OSD characters will be displayed in the upper right corner of the screen; Press "Channel+"and "Video" on the machine panel at the same time to enter the maintenance menu. "Menu" key to turn pages.

Exit: Press the "screen key" to exit.

5D60/5D66 movement:

Input: 1. Press the multi-key "-/-"on the remote control, and the word "-"will be displayed on the screen;

2. Press and hold the "menu key" and "standby key" on the machine panel at the same time, and then press the number key "7" on the remote control continuously to display the words "777" on the screen; At this time, the software setting date "-"will appear at the bottom of the screen;

3. Press "Menu" on the remote control, then press "Channel+" to enter the factory mode, press "Channel+/-" to select an item, press "Volume+/-" to change parameters, and press "Mute" after setting to make the+sign next to the item disappear (a+sign will appear next to the item when repositioning). Exit: Return to the main menu, select the shipping item in the menu and press the "Volume+"key.

5D70/5D75/5D76 movement:

Input: Press the "Volume-"button of this machine. After the volume is 0, press and hold the "perpetual calendar" button on the remote control for 3 seconds to enter the linear and balanced adjustment project. Press the "Mute" button for 3 seconds to enter the factory. In addition to the above adjustments, you can also change the register address. Note: After entering the factory mode, you should first release the "Calendar" key and then release the "Volume-"key to prevent you from exiting immediately after entering the factory. Exit: press the "standby" or "perpetual calendar" key to exit. Note: You can directly use the same model of empty memory IC, which will be initialized automatically after booting.

6D72 movement /6D76 movement /6D78 movement/;

Input: 1. Reduce the volume to zero, press and hold the "Volume-"button on the panel and the "Calendar" button on the remote control for 4 seconds, and then release. 2. Reduce the volume to zero, press and hold the "Volume-"button on the panel and the "Mute" button on the remote control for 4 seconds, and then release.

Note: According to the method 1, the linear and white balance can be adjusted after input. After entering according to method 2, besides linear and white balance adjustment, the memory address can also be changed. Exit: When you press 1 to enter, you can press the "Calendar" key to exit. When using method 2 to enter, you can press the "standby" key to exit.

Note: When using empty memory or memory with data during maintenance, it can be initialized first. Initialization method: Press Method 2 to enter the factory mode, and press the "Menu" key to enter the EEPROM adjustment menu. Press the "Channel+/-"key and the "Volume+/-"key to change the data at address 0 10 to "AF" and display "OK" after writing. When the main power supply is turned off and turned on again, the initialization is completed.

5D90 movement:

Input: 1. Press the multi-key "-/-"on the remote control, and the word "-"will be displayed on the screen;

2. Press and hold the "menu key" on the machine panel at the same time, and then press the number key "7" on the remote control continuously to display the words "777" on the screen; At this time, the software setting date "-"will appear at the bottom of the screen; 3. Press the menu button on the remote control, then press the channel+button to enter the factory mode, and press the channel+/-button to select the project.

Press "Volume+/-"to change the parameters. After setting, press "Mute" to make the+sign next to the item disappear (a+sign will appear next to the item when repositioning), indicating that it has been saved. Exit: Return to the main menu, select the shipping item in the menu and press the "Volume-"key.

Method of 6D92 movement entering factory mode:

1. How to enter the factory mode: A: Press the menu key on the control panel for the first time, and then release it after three seconds. Press the number keys 3, 5, 1 and 0 of the remote control in turn, with an interval of no more than 2 seconds. B: Come back later. Press the menu key, and then press the volume reduction key to enter; 2. Adjustment method: press the channel up/down key to select the item to be adjusted, and press the volume up/down key to change the value or state of the selected item; Press the menu key to return to the adjustment item menu; 3. How to exit the factory mode: select the shipment item (factory setting) in the maintenance menu; Aging status: blue screen and automatic shutdown are: off; (Memory is in service, blue screen and automatic shutdown are turned off. It is recommended to exit the service status after all debugging work is completed; When you leave the service state, the TV will automatically turn on the blue screen and turn off automatically, and return to the 1 channel.

6D95 movement /6D96 movement:

Enter: Press the "-/-"key on the remote control to switch to "-",while holding down the "Menu+Standby" key on the panel. Enter 777 with the remote control, and it will play the maintenance function of this machine. In this state, press the "Menu" key, and then press "Channel+". Exit: Select the shipping item in the service menu and press the "Volume+"key.

6D96 movement (16: 9 color TV, such as 28 inches)

Access method: Press and hold the "Volume-"to "0" key on the panel, then press the "-/-"key on the remote control to switch to "-",and enter 777 with the remote control to play the service function of this machine. In this state, press the Menu key, and then press the Channel+key to enter the factory mode. Exit: Select the shipping item in the service menu and press the "Volume+"key.

Two. a series of

3I0 1/5I0 1 movement:

Enter: Install a key to the left of the "7" key on the remote control, press this key, and then press the (red) "Image Menu Key" to enter. After debugging, press OSD to save.

Exit: Just press the (green) "Image Menu Key".

Note: VGA off-state factory debugging is the same as TV state input method, and it is best to debug under Windows/Dos.

3I30/5I30 movement:

Enter: Press and hold the "Volume Down" key on the keyboard until it reaches the "00" state, and then press the on-screen key of the remote control to enter.

Exit: After debugging, just press "Clear".

Note: The program addition and subtraction keys are used to turn pages to select debugging items, and the volume addition and subtraction keys are used to adjust debugging parameters (when there are two debugging items on a page,

The second item is debugged by using the "image mode" and "sound mode" keys), and is automatically recorded in the memory after each parameter is changed.

Three. M series

5M0 1 movement:

Input: Press and hold the "Volume+/-key" on the keyboard, and then press the "Li Yin key" on the remote control. After debugging, press the number key "2" to save.

Exit: Just press the "Lee Key".

5M 10 movement:

Enter: Install a key in the lower right corner of the remote controller (the lower right corner of all keys, that is, to the right of the surround sound key or directly below the sound mode key), and press this key to enter. Press the Menu key to switch the debugging menu, press the Channel+/-key to wrap the line, and press the Volume+/-key to adjust the parameters. Exit: "Remote shutdown" can exit.

6M20 movement /6M2 1 movement /6M22 movement /6M23 movement:

Enter: press the "perpetual calendar" key first, then press the "3, 6 and 9" keys in turn, and use the "perpetual calendar" key to switch the menu.

Exit: Press the "Menu" key to exit.

Four. N series

N series movements leave the factory: before starting, press and hold the "Volume+/-key" on the panel at the same time to adjust the field, white balance and other parameters; Enter: Press and hold the "Channel+/-key" on the panel at the same time before starting the setting function;

Exit: Just turn it off.

3N 10/3N20 movement: AN5 199

The rewriting method of the memory: press and hold the "channel+/-key" at the same time, then turn on the computer, and then write the second line of data: 777550733 1 (the first line of data is 123456789A).

Shut down and exit directly. Note: the setting parameters of 3N 10 music player are11715046-4n10 movement:

The entry and exit mode is the same as that of 3N 10 movement, and the data in the second row is "1715043-"(the last two digits need not be changed, and will be set automatically after the machine is initialized).

5N0 1 movement: AN5 195

Memory rewriting method: press and hold the "Channel+/-key" at the same time, then turn on the computer and press it several times at the same time after replacing the new memory.

"S.M" and "P.M" keys, the screen will change slightly (jump or blink), indicating that the memory initialization is completed. The data in the second line is "123635" (the first line is 123456). 5N 10 movement: AN5 199

The operation method is the same as that of 5N0 1 movement, and the data in the second line is "1177504371". Note: The setting parameters of 5N 10 music player are1375043705N20 movement: AN5 199.

The operation method is the same as that of 5N0 1 movement, and the data in the second line is "1127504371". Note: The debugging of 5N20 requires two kinds of RF PAL/NTSC signals to be debugged separately. Five. Series p

3P 10 movement: OM8838

Enter: Press SERVICE (operation key, on the upper right of remote control direction key) and MUTE (mute key) on the remote control at the same time.

Exit: Just turn it off.

3P20 movement: OM8838

Method 1: use 3P 10 remote controller to enter, just press "Super Receive" on the remote controller, press "Menu" to select menu, press "Channel+/-"to select items, press "Volume+/-"to change parameters and exit: just press "Super Receive". Exit: Just press the "Super Receive" button.

Method 2: Use the 3P20 remote control to enter and press the "Super Receive button" (it has been pasted, and you need to open it and compare it with the 3P 10 remote control to find the key).

Exit: Just press the "Super Receive Key".

Entry method 3: Short-circuit pin 9 and pin 14 of the IC in the small remote controller to enter, and exit is the same.

Exit: same as entrance.

5P 10 movement: OM8839

Enter: First, install a key in the upper right corner of the direction key of the remote control, and press "this key" and "mute key" at the same time to enter.

Exit: Just press the "Clear Key".

5P20 movement: OM8839

Access Method 1: Access with 5P20 remote controller: First, install a key in the upper left corner of the direction key of the remote controller, and press this key (called "factory key") to enter. Press "Menu Key" to select a submenu, press "Channel+/-"to select an item, press "Volume+/-"to change parameters and exit: press the Clear key. Access Method 2: Use the 5P 10 remote controller to access: Just press the "Super Receive button".

Exit: Press "Super Receive Key" to exit.

Method 3: Use the 5P03 remote control to enter, and press the "image mode key".

Exit: Press "Image Mode Key" to exit.

5P2 1 movement: OM8839

Input: 1. In the early stage, press the position of the second key (called "factory key") in the penultimate line of the remote control, press the menu key to select the submenu, press the "channel+/-key" to select the item, and press the volume increase or decrease key to adjust the parameters. 2. Press the screen key of the remote control to enter the machine later, and minimize the volume. Note: factory mode cannot be entered in AV state.

Exit: press the "factory key" to exit; The latter can press the "standby" key.

3P30/4P30/5P30 movement: TDA9370 TDA9373

Enter: Press and hold the "Volume Down" key on the keyboard until it reaches the "00" state, and then press the on-screen key of the remote control to enter.

Exit: Press the Clear key. Note: Press the number keys to select debugging items; P-MOD password is "789".

S series of intransitive verbs

4S02/4S 10 movement:

Enter: First press the "Clear" key on the remote control, then press the "Volume-"key (VOL-), and finally press the "Back Key" (the key in the middle of the three keys at the bottom of the remote control). The master password of the user's child lock is: press the "screen display" button of the remote control first and then press the "mute" button to exit; Press the "PIC" key of the remote control.

5S0 1 Movement: STV22 16

Enter: Press the "TV/AV" key and "MENU" key on the panel at the same time before starting the machine. After entering, press PIC to select the submenu, press Program+/- to select the subitem, and press Volume+/- to adjust the project parameters. Note: If there is no Chinese menu after CPU replacement, enter the factory mode and change the option to 026 1. If there is subwoofer, change it to 126 1.

Exit: Just press the "Image Mode Key" on the remote control.

5S 10 movement: STV2246/STV2247

Enter: Press Menu, AV and Select to enter.

Exit: Just press the "Select Key". Note: Unlock 5S 10 movement: It needs to be unlocked now due to user's misoperation. First, press two numeric keys (such as 1, 7, etc.). ), and then press the "sound mode key".

3S28/5S28 movement: STV2246/STV2247

Enter: Press the "Factory" key and "Select" key of the remote control at the same time, and the screen will display ":". Enter "0 1 15" to enter the "M 1" debugging menu and "104" to enter the "M2" debugging menu. Enter 1967 to enter the function setting menu, and exit: press the "standby" key to exit.

3S30 movement /3S3 1 movement /5S30 movement:

Enter: Press the "Sleep Timing" key and the "Menu" key on the remote control at the same time to enter the password input state, and enter "13 14" to enter the debugging state 1. Enter "3344" to enter debugging state 2. Enter "2086" to enter the function setting menu. Then press the number keys "0, 1, 2-" to select items, and press the "Volume-"key to adjust parameters. Exit: press the "standby" key to exit.

Seven. T series TB 1238 TB 1240

T-series movement factory mode entry: TMPA 8803 TMPA 8808 TMPA 8823 TMPA 8829 8829 Entry: 1, adjust the volume to the minimum (00).

2. Press and hold the Volume button on the machine panel and press the Screen button on the remote control to enter the "S" mode. The "s" character will appear in the upper right corner of the screen.

3. Press the "Screen Key" of the remote control, and the "S" character in the upper right corner of the screen disappears (the OSD character on the screen is cleared). Repeat step 2 to enter the "D" mode, and the "D" character will appear in the upper right corner of the screen. Press "Channel+/-key" to change items, and press "Volume+/-key" to change parameters. Exit: press the "standby key" to exit the "D" mode.

Eight. Y series

3Y0 1/3Y20/4Y0 1 Movement: LA768 10

Input: 1. Press "Menu" of the remote control twice to enter "Image Menu";

2. Press "Q-VIEW" and "MUTE" in turn to enter;

3. Press "Time" to switch the factory menu.

Exit: Just press Menu.

3Y30 movement LA76930

How to enter the factory mode: press the "-/-"key on the remote control to switch to the three-key input state (-), and input 579 with the remote control to start the maintenance function of the machine, and the machine will always be in the maintenance state; In the service state, press the Menu key, and then press the Channel+key to enter the debugging menu.

Adjustment method: press the channel up/down key to select the item to be adjusted, and press the volume up/down key to change the value or state of the selected item; During the adjustment, press the "mute" key to save, and press the "screen display" key to restore. How to exit the factory mode: press the menu button on the remote control to exit the factory mode. Aging status: both blue screen and automatic shutdown are set to ╳; (The memory is in the service state, and the blue screen and automatic shutdown have been turned to ╳. It is recommended to exit the service state after all debugging work is completed; When you exit the service status, the TV will automatically set the blue screen and automatic shutdown to √ and return to the 1 channel. 5Y2 1/5Y30/5Y3 1 Movement: LA76832/LA76828

Enter: press and hold the "menu key" on the keyboard, and then press the "1", "5" and "9" keys on the remote control in turn;

Exit: enter the factory mode LA76832 maintenance menu 00, change "PROD ON 1" to "0", and press the "menu key" of the remote controller to exit the factory mode. Note: Use the "Volume+,-"keys to turn pages; The early "product 1" may be in menu 06.

Nine, LCD TV

Input:15,20 inches: smallest volume. Hold down the "Volume Down" key on the keyboard and press the "Screen Display" key on the remote control at the same time. 30 inch: Enter 78 12 15 quickly after the volume is reduced to zero (if it is slow, it will change the channel). Exit: Just turn it off. (Remote shutdown before AC shutdown)

22\\20 LCD TV enters the factory mode: press the mute button of the remote controller four times, then press the screen display button four times, and press the menu button of the remote controller to switch the debugging menu.

The master password is: after entering 4759, turn it off and then on. At this point, all passwords are "0000".

Plasma TV

Input: press "SVC" key (red key) to enter, press "Adjust" key to turn pages, "PR+/-" to change items, "VOL+/-" to change parameters.

Exit: press TV/AV key to exit. Note: Only the factory remote control can be used to enter and exit.

The method of 43PAAHV plasma TV entering factory mode;

Enter: press the information button of the remote control, then press the enter button of the remote control, then press the mute button of the remote control to enter, and press the menu button of the remote control to exit.

Note: At present, this machine can only adjust the white balance. At the same time, if the data of this machine is found to be confused, it can also enter the factory mode. In "Rest" mode, press the Enter key of the remote control to reset.

Xi。 PDP tv8（S）

Enter: Press the "Menu" key to enter the setting menu, press the "Channel+-"key to select the "Definition" item, press and hold the "Volume-"key on the key control panel to reduce the definition to 0, and press and hold the "Menu" key on the remote control at the same time, and enter the factory mode after a few seconds. Exit: Remote shutdown

12.CRT rear projection TV (300/300s/480/580 HD /680 HD)

Enter: press the "22C" key (or the user's remote control-the key at the bottom right corner) to enter the menu: set the chip -IO to116; NUM is set to1; Read is set to enter. Press "PV/P?" Key options; Press "V+/V-" to adjust parameters and exit: Return to the initial interface (press "22C" key) and change FAC to "x" to exit.

88HD rear projection TV

1. Enter the factory: press IIC to enter the password, and enter 123 to enter the factory.

2. Press the "Geometry" key in the factory interface to enter the geometric adjustment;

3. Press the "Convergence" key in the factory interface to enter the convergence adjustment;

Geometric adjustment is the same as the previous machine debugging method, except that some parameters are added, such as AFC-AGNLE (parallelogram adjustment), PIN-AMP (pincushion adjustment), UP-CPIN (upper corner pincushion adjustment), LO-CPIN (lower corner pincushion adjustment) and PINPHASE (trapezoid adjustment).

Note: In PAL system, the horizontal position is fixed at 46 and the vertical position is fixed at 32. If the downstream magnetic field center is not correct in this state, please adjust the DY magnetic ring in geometric state to align the grating center with the screen center. N system adjusts the system parameters based on the geometric adjustment of PAL system to make the grating coincide with the center of the screen.