Why not move the bed?

Why not move a bed? Many people in China believe in Feng Shui theory, especially when moving. Feng shui is sometimes related to a family's fortune and personal fortune. Let me share with you why not move a bed. Let's have a look.

Why not move the bed? 1 why not move the bed when you move to a new home?

In fact, moving is the same as making the bed. According to Feng Shui, moving is called getting out of bed. The timing of moving refers to the time to go to bed. It is best to look up China's almanac while lying in bed. Choose an auspicious day of the ecliptic that is suitable for bed installation in China lunar calendar, and put the bed on the auspicious day of the ecliptic. However, it should be noted that it is not necessarily suitable for fixed bed, and the time required for fixed bed is correspondingly different. In practice, many people move their beds to their new homes first, and it is also possible to straighten their beds on auspicious days.

Choose an auspicious day to make a bed: making a bed is something we must do when we move. This step can be done before or on the auspicious day of moving. The general step is to prepare ten coins first, rinse them repeatedly with salt water and dry them quickly. When you put these ten coins on the bed, hold them in your hands, put your hands together, sincerely pray for the mother's blessing, and then scatter them under the bed, thus completing the step of putting them on the bed.

After you make the bed, make it up. In some places, elders are invited to make beds, and now most of them choose unmarried women to make beds. The content of making a bed varies from place to place, and there are also differences between making a bed by moving and making a bed by getting married. However, the ultimate goal of these different ways of making beds is just to get lucky. Generally, a new home cannot have an old bed.

Of course, the bed should be in the bedroom. After choosing a bedroom, you can find a suitable place to sleep. The orientation of the bed refers to which direction the bed should be placed in the bedroom and which direction the bed should be oriented. According to the ancient geomantic theory, the bed should be placed in "the life is auspicious and the house is auspicious". It means that the orientation of the bed needs to be based on its own eight characters, and the seats in the whole house have always been fixed.

What's the point of moving the old bed to the new house?

Special circumstances:

(1) If a new bed is added, it can be installed before moving, and there is no need to choose the occupancy date of the bed in the new house, because the bed is one of the furniture.

(2) If it is not suitable for installation on the day of moving, you can also get restless. You can put the bed well first, and then remove the positioning when the bed is installed. Migration can be to get things ready first, and then

Report on the right day.

Precautions for entering the house:

(1) The ceremony of entering the house must be to open the door on an auspicious day, burn incense to worship the ancestors, light a fire or set off firecrackers.

(2) When entering the house, you need to prepare rice. The rice barrel is eight minutes full and red envelopes are placed on the rice barrel.

(3) A pair of dustpan and new broom: red cloth strips should be tied on them.

(4) New homes should be pasted with red couplets for good luck. Turn on the lights at home for peace.

Precautions for moving:

(1) When moving, it's best to hand over the things to be moved in the new house to others. If you move into a new house, you'd better do it yourself. When moving into a new house, the whole family should not enter the house empty-handed.

Why not move the bed when moving? 2 how to move the bed when moving? What are the precautions for moving a bed and changing a room?

0 1, be familiar with bed moving steps in advance.

Case 1: The bed does not need to be disassembled.

1. Measure the length, width and height of the bed, and measure the dimensions of doors and elevators/corridors. If the bed can pass smoothly, there is no need to disassemble it, which can save a lot of trouble.

2. Even if you don't need to disassemble, it's best to disassemble the bedplate and carry it alone first, in case the bedplate becomes loose during handling and falls down to hurt people.

3. Wrap several corners of the bed with bubble film and cardboard and fix it with adhesive tape to prevent scratching the floor and wall of the new house.

At present, many family beds are made of solid wood. Although the quality is guaranteed, it is too heavy and inconvenient to carry. Therefore, in the process of carrying the bed, at least two to four people should participate, and at the same time, attention should be paid to maintaining the balance of the bed surface during the carrying process.

Case 2: The bed is large and needs to be dismantled.

When the bed is too big to pass through doors, elevators and corridors, it can only be disassembled. Dismantling the bed is a technical job, which requires enough care and patience. People who have never had the experience of removing the bed are not recommended to try, otherwise the repair is likely to fail.

1. Before removing the bed, remove the mattress to make room. It should be noted that the mattress is difficult to clean after it is dirty, so it must be packed before handling. You can buy woven bags and kraft paper bags online to package mattresses. If you have old curtains and sheets at home, you can make full use of them to install mattresses. At the same time, in order to prevent the deformation of the mattress, we must pay attention to the uniform stress of the mattress during packaging and handling, and it is forbidden to bind it with ropes.

2. Before disassembling the bed, it is recommended to observe the structure of the bed carefully, study the instructions carefully, and take care of the structure before disassembling. Take multi-angle photos of the lathe bed before disassembly, so as to find the correct position for the components during assembly. In addition, before the bedstead is disassembled, the feet of the bedplate are coded first, which is convenient for correct assembly when you get to a new home. At the same time, put the screws and other small parts in a unified way to prevent them from being lost!

3. After you remove the bed, you should clean it up. First, protect the edges and corners of the bed with hard corner protectors, then wrap it with wrapping film and bubble film layer by layer, and finally fix it with adhesive tape in all directions to minimize possible extrusion and collision during handling.

After it is installed, you can carry it to the car. Xiaofeng suggested that it should be carried in the order from big to small, first mattress-bed-bed board-bed head, and finally the end of bed. The reason for this is to facilitate loading.

02, master the matters needing attention in the process of moving bed.

1. Before bed moving, determine the bed moving method and route. There are ways to move the bed: find someone to move it, or move it yourself. It is more convenient and cost-effective to find someone to move. You can do according to your actual situation. As for the choice of bed-moving route, it is suggested to make an on-the-spot investigation, mainly focusing on the internal space and carrying capacity of the elevator.

2. Bedridden parts should be placed neatly when loading, so as to minimize the gap between articles and avoid dumping during transportation. It is recommended to wrap the wall with a blanket to avoid leaving scratches.

3. Plan the location of the new bed before entering the new home, and minimize the movement once it is determined. Avoid noise affecting the neighbors downstairs. At the same time, the bed is heavy and difficult to lift by personal strength. If you drag it on the floor, it may leave scratches. So it's best to do it in one step.