What is the reasonable construction sequence of the decoration project?

Hello, the construction sequence of the decoration project is: building structure transformation → water and electricity wiring → waterproof engineering → tile paving → carpentry → carpentry painting → wall painting → floor paving → water and electricity installation → equipment installation → pollution control → sanitation and cleaning. When formulating specific construction procedures, we should usually pay attention to shortening the construction period, protecting finished products and making reasonable overall arrangements. The following are some design and construction problems that often appear in the construction process.

Related construction procedure sequence

Civil engineering reconstruction stage

(1), beating, tearing down walls, and building walls;

(2), slotting and cutting, hydropower transformation;

(3), buried trough hidden hydropower reconstruction project;

(4), waterproof engineering, toilet (kitchen) ground for 24 hours closed water test;

(5), bathroom and kitchen walls, floor tiles;

6. Customize doors, cabinets, bathtubs, furniture, etc.

(2) Primary treatment stage

(1), carpentry comes into play, ceiling, plaster line;

(2) wrapping the door cover and the window cover to make a wooden cabinet frame;

③ Making all kinds of wooden doors and modeling doors at the same time;

④ Brush dust-proof paint (clear oil) on the wooden panel;

(5) Leveling and laying the marble countertop on the windowsill;

6, wood veneer pasting, assembly line production and fine installation;

All landowners, metope grassroots processing, grinding, leveling;

Today, the edge joints of furniture, doors and windows are bonded with adhesive (protection).

(3) Detail processing stage

(1), metope paint at least three times;

(2), furniture paint comes into play, repair eyes, paint; 《/span & gt；

(3), processing edges and corners, laying floor tiles and doorstones;

(4) Laying the floor and the "floor companion" under the floor to prevent the floor from being polluted by formaldehyde, mold and germs;

⑤ Installation and debugging of lamps, switches, sockets, sanitary wares, handles, door locks and pendants;

All landowners, cleaning, floor tile seam, seam;

Today, the internal preliminary acceptance of the decoration company;

Pet-name ruby, three parties make an appointment for formal acceptance and delivery to the owner.

(4) Check-in preparation stage

(1), furniture comes into play and uses "charcoal in charcoal" to remove air pollution and peculiar smell inside the furniture;

(2), all kinds of electrical products and accessories such as curtain cloth comes into play;

③ Indoor air quality testing or comprehensive treatment of indoor air pollution;

(4) hygiene and cleanliness;

5. Choose the auspicious day to move into the house.

Matters needing attention in related process

First, the first is to go through the admission procedures. Generally speaking, the check-in formalities need the original and photocopy of the ID card of the person in charge of the decoration team, the original and photocopy of the owner's ID card, the copy of the business license of the decoration company, the copy of the construction permit of the decoration company and the decoration deposit. Of course, you need to specifically ask the owner's housing management office before going through the formalities.

Second, the next step is to knock on the wall. Before design, we should master the load-bearing structure of the building and distinguish the detachable part from the non-detachable part. Under normal circumstances, in residential areas where unified property management is implemented, except for the load-bearing walls and columns of buildings, all building components such as windows and balconies that affect the appearance of buildings shall not be changed. The calculation of knocking area can be based on the floor plan of the house, which has various detailed data about the house. Remember to measure the area to be knocked on the wall before knocking on the wall. You should know that knocking on the wall is based on the area.

Third, knock on the wall, clean up the garbage, and the clay figurine will enter the arena. Masons are mainly responsible for building walls, painting, sporadic repair, tiling, waterproofing, leveling the ground and installing floor drains.

(1) Cement mortar is needed for wall building and plastering, but the difference is only in different proportions. Bricklaying and plastering are the preliminary work of plasterers. After finishing these two items, the mason's union will first measure the actual area of bricklaying and plastering, and then he will check these dimensions with the owner.

(2) Compared with circular wall tiles, right-angle wall tiles are prone to uneven or uneven joints after being laid. It is suggested that high-quality products should be selected for right-angle wall tiles, and round wall tiles should be selected as far as possible under the condition of low economic investment.

(3) Mosaic construction requirements are strict, and the wall should be plastered and leveled first, and paved from top to bottom. The layout of furniture and equipment should be considered in the paving design of wall tiles and ground decorative lines to avoid blocking and affecting the space effect. When laying tiles in irregular space, the joints of tiles are easy to be messy, and the influence on the space effect should be controlled well.

(4) It is best to tile a room by one person. If two people do it, the effect may be different because of different styles.

(5) In addition to the waterproof project construction as required, after the waterproof construction is completed, the water storage test should be done. Pay attention to moistureproof in damp space. Furniture with poor moisture-proof performance should be arranged in a dry space. When wooden furniture is used as a partition between kitchen and dining room, it must be waterproof. The back of wooden cabinet furniture near the bathroom and kitchen walls also needs moisture-proof treatment.

Four, Plaster workers wall after plastering, plumbers and hydropower transformation at the same time. The main work of hydropower transformation includes hydropower positioning, slotting, pipe burying and threading.

① The first step of hydropower transformation is hydropower positioning, that is, the position of switch socket and waterway interface in the whole house is determined according to the user's needs, and the plumber should explain the line direction to the user according to the position of switch, socket and faucet. Moreover, we should pay attention to the principle of "water goes up to the sky, electricity goes down to the ground", that is, the water pipe goes to the ceiling, and the strong and weak electricity goes to the ground as far as possible, and the strong and weak electricity cannot cross and the parallel distance is greater than 30 "/span >；; Cm, if you need to cross, you need an iron pipe to shield the magnetic field.

(2) the installation design of distribution box and information box should consider convenience, concealment and safety, and pay attention to the direct connection with the external main line; Electrical wiring should not be hidden in building load-bearing walls and columns.

③ The electrical circuit design of sockets, switches and lamps should consider the variability of indoor space, so as to prepare for the possible use of different spaces, and reduce the obstacles for some users to re-plan and design during use, such as the influence of the movement of desks, decorative cabinets and electrical equipment on electricity and water consumption. At the same time, it should be noted that the price of new buried wires is different from that of replacement wires.

(4) In the case of heavy lamps and lanterns, attention should be paid to embedding the load-bearing components in the ceiling, and not directly installing them on the wooden wedge, so as to avoid indoor unsafe factors.

⑤ After hydropower positioning, the next step is slotting. The grooves made by good beauticians are basically straight lines, and the edges of the grooves are basically hairless. Note that before slotting, be sure to ask the plumber to mark all the water and electricity trends on the wall, and remember to compare them with the water and electricity diagram to see if they are consistent.

⑥ When the waterway is rebuilt, pay attention to the cleanliness around it. When signing a waterway reconstruction contract, it is best to indicate the materials used for waterway reconstruction. In addition, attention should be paid to the size of the sewer pipe in the original room during waterway reconstruction, and the pipe connected with the sewer pipe should preferably match the original sewer pipe. Hot and cold water pipes should be hot on the left and cold on the right, and the spacing is generally not less than 20 cm. It depends on the distance between the hot and cold water pipes of the faucet.

Five, after the completion of the hydropower transformation carpentry approach, carpentry should pay attention to:

When you get the designer's drawings, you'd better check the dimensions carefully before signing. Usually, the specifications of standard wood core board and veneer board are1.2m "/span >; X glass is X, and the production of plane size exceeding specifications needs collage or special customization. If the plane and thickness specifications of materials are ignored, it will cause great obstacles and excessive expenses.

(2) Carpenters should bring their own tools, such as toolbox, workbench, air compressor, etc. In particular, the workbench must not be made of wood bought by the owner by the decoration workers, and it must be made clear to the foreman of the decoration company or the decoration team before the decoration.

(3) Before the carpentry comes into play, the plates shall go first. Take a closer look at whether the board entering the site is in line with the contract and whether it is genuine.

(4) Like the plumber, carpentry is also a big profit source for the decoration team. At the same time, it is also a major source of formaldehyde in decoration. To control this, we should not only comply with the national environmental protection regulations, but also choose the wood paint used.

Six, the painter comes into play, after the bricklayer batch of ash, metope is dry, in the batch of putty, namely the first stage of painting. If the decoration is painted with a primer and two topcoats, then the wall must be polished three times. The first grinding is to grind the dry wall with sandpaper after the putty is approved and before brushing the primer for the first time; The second grinding is before the primer is applied and the top coat is thoroughly applied. At this time, it is better to use sandpaper with higher label than sandpaper polished for the first time. The third time is before painting the top coat for the first time and before painting the top coat for the second time after drying. At this time, the wall must be polished with advanced sandpaper, and only in this way can the brushing effect of the wall be guaranteed. Otherwise, nine times out of ten, your wall will feel like flour after painting. There are certain restrictions on the proportion of water added to each coating, so it is necessary to pay attention to the construction in strict accordance with the construction instructions.

Seven, pay attention to indoor decoration pollution. Under the current situation in China, almost every renovation will lead to pollution. We should not take any chances, nor think that the decoration pollution can be controlled by planting green plants by opening windows for ventilation. If so, those large enterprises that produce pollution control products will not starve to death. Pollution is long-term, harmful and hidden, especially for families who are about to have children and families with pregnant women or children. Don't leave a lifelong regret for the future! Conditional families must carry out necessary pollution prevention and control during the decoration process, and choose powerful enterprises or reliable products to carry out necessary air quality testing before moving in after decoration.

Hope to adopt!