Traditional Culture Encyclopedia - Lucky day inquiry - What problems should be paid attention to in house decoration? Including the specific structure and materials?

What problems should be paid attention to in house decoration? Including the specific structure and materials?

There are many problems that need attention in maintenance. The following are detailed decoration precautions summarized by many experienced people. Due to too much content, only 100 articles were written. For the complete 200 articles, please refer to my information.

Summary of decoration matters needing attention

(200 complete works)

1. Don't finish the partition of the shoe cabinet, leave some space for the ash of the shoes to leak to the end, and install lights above the sink and gas stove. When determining the location of the bathroom floor drain, we must first think about it and measure the size. The floor drain is best located on one side of the brick. If it is in the middle of the brick, the floor drain will not be the lowest point no matter how inclined the brick is.

2. There is no switch in the bathroom and air conditioning socket. Especially for the electric water heater in the bathroom, it is advisable to adopt a plug two-level switch. If you want to turn off the electric heater, it is dangerous to unplug it.

3. In the final analysis, the external corner treatment of brick still depends on the level of workers. If the bricklayer is good and the tools for grinding ceramic tiles are better, you should not hesitate to choose the method of grinding 45 degrees. In terms of effect, as long as the grinding is good, grinding the outer angle of 45 degrees is the most beautiful! If the level of workers is really not good, then you still choose to use angle iron, because it is not as good as using angle iron to grind at a 45-degree angle.

It is also important to test the pressure after the water pipes are arranged. Everyone must be present during the test, and the test time should be at least 30 minutes, preferably 1 hour if conditions permit. 10 kg pressure, and finally passed the test without reducing energy.

5. When making a plastic door, be sure to calculate the size of the plastic door frame protruding from the wall surface and inform the installer, so that the final door frame and the tiled wall surface are flat, which is both beautiful and hygienic.

6. The carpenter's doorcase and the bricklayer's tiling should also be coordinated. When wrapping the door cover, you should consider whether the ground below (either side of the ground on both sides of the door) should be tiled or leveled with other cement mortar, because if the door cover is nailed before tiling, it will be wrapped all the way to the ground. When cement is used in the future, if the cement and the door cover are stained, it will lead to water absorption and mildew of the door cover wood.

7. The bottom of the mattress and the bedplate must be breathable. Generally, it is best to use fir boards as bed boards.

8. Try to use paper tape when drawing.

9. Pay attention when buying lamps: generally try to use glass, stainless steel, copper or wood (shelves). Generally don't buy any iron with other coatings and paints on it, which is easy to fade.

10. The washbasin should use ceramic basin as far as possible, and the glass basin is difficult to clean.

1 1. Hydropower reconstruction should be planned by themselves, and they are required to drive in a straight line. I watched them draw their own lines, and they all followed them. You must personally check and accept every project.

12. Waterproofing must be done well, and water must be tested!

13. Many verbal agreements in construction have become a gap when checking out, so be sure to write them clearly in black and white. Be sure to ask clearly about the added or reduced items and write clearly the price!

14. If the floor is installed on the ground, the ground should be re-cemented and leveled.

15. For the kitchen door, it is best to use a carpenter who wants to decorate it into a wooden rail door.

16. Install as many power plugs as possible in the living room.

17. There is a partition outside the shower in the bathroom. You can't save yourself by pulling the shower curtain. Actually, it was very inconvenient, and the water spilled all over the floor.

18. Doors and doorframes shall be made of fine-grained materials.

19. Make sure that your waterway is OK before installing the cabinet.

20. Don't choose white for kitchen and bathroom floor tiles.

2 1. The ceiling should pay special attention to leveling putty before plastering Dulux.

22. Don't have too many lights in the living room, it's better to be concise, otherwise it will be like a lamp shop!

23. Buy things that need to be installed and try to install the goods. It really doesn't include installation. After installation, you must insist on paying the full amount!

24. When decorating, bring the business cards of the manufacturers and merchants you collected before.

25. It is best to remove the protective film of aluminum gusset plate before installation.

26. It is best to use shutter doors for shoe cabinets to prevent odor. A socket can be left next to the shoe cabinet for inserting and airing shoes.

27. A small lamp can be installed in the place where vegetables are cut.

28. Restaurants can also be equipped with exhaust fans, so that when eating hot pot or barbecue, the ceiling of the hall will not be dirty.

29. It's best to arrange a cabinet for sundries at the door, which can be placed on the shoe cabinet. It is convenient to put common things, such as umbrellas, bags, scissors, small change, medicines that you often take, etc. There.

30. There is absolutely no need to use expensive smallpox. If you are not too worried about humidity and oil fume, it is recommended to brush waterproof paint with moisture-proof gypsum board. A guest guard of my family made this. It's very beautiful. If you must use aluminum gusset ceiling, I suggest 1, not too expensive. 2. Use solid colors, especially the kitchen ceiling. Pure white will do. Unless the color matches the decoration style, it is easy to be out of harmony. Make up your mind and don't trust the eyes that sell the ceiling. Their eyes are really corny. 4, staring at the scene, it is very important to close the edge, don't let them be sloppy, or leave a black seam, which is ugly.

3 1. Third, if you need to punch holes, continue to stick tiles, and the exhaust holes of range hoods and water heaters should be pre-punched. It's inconvenient to wait until the tile is pasted. Therefore, before the renovation, you must choose the range hood, cooker and water heater to determine the size of the hole.

32. Considering that the customized cabinets are beautiful, but not durable, after synthesizing the opinions and experiences of some students on the Internet, the floor cabinets are made of cement, with ceramic tiles inside and outside, marble countertops, hanging cabinets and cabinet doors made of wood. The cabinets made by this method are durable and moisture-proof. And it doesn't cost much Many neighbors read it and said yes, I didn't blow it.

33. After making the door cover, the plasterer began to install plaster lines and paint the walls. The wall of my house was originally flat, and 2-3 roads could be approved. When approving the ash, it is to polish it once, then brush the primer, polish it again after brushing, and finally brush the top coat twice with ICI. The whole wall looks smooth and flat, which is really good. After the wall smallpox project was completed, the carpenter began to make wardrobes. The wardrobe is made of 18cm Ye Wei brand core board with decorative board outside. Although it is not as beautiful as the furniture store, it is durable and the quality should be better than the one bought. I'm not afraid to stand on the board of the cabinet. I'm afraid not. The backboard is also thick, and I bought it very thin.

34. Other students must pay attention to the following points when pasting tiles: ① It is best to be on site; ② Some imperfect tiles can be pasted by workers in some invisible places in the future, such as cabinets, sinks and mirrors. Be careful not to let workers paste them in the above positions, otherwise nothing will be seen in the future and money will be wasted. (3) Before the wall brick and floor tile are pasted, the soaking time must be enough. (4) Be sure to block the floor drain with something to prevent the cement from falling and blocking. The floor drain in my house is blocked by falling cement. Looking for the management office to clear 30 doors and get a lot of mud. ⑤ When people are on site, workers will not waste too many tiles. My family wasn't there when I put up the tiles. Later, when I went to see them, a lot of bricks were wasted, which was very painful. All sweat and rice.

35. Length and height of the wall. If a bathroom has four walls, the length and height of each wall should be measured. Then deduct the area of a window and door. Finally, calculate the area of the ground. After you have measured your size, you can also take it to the shop selling tiles, and they will help you satisfy it again. Just add a 5% loss.

36. It is best to double-control the ceiling light in the bedroom, so that you won't get up and turn off the lights when you lie in bed in winter.

37. The location, height and spacing of sockets must be calculated. Occasionally, the position of the card holder was hit by steel bars first, and then the card holder was found to be blocked by TV cabinets, microwave ovens and desks, so we had to move the position of the first two pieces of furniture higher. Finally, it is found that not only the height is not ergonomic, but also the stainless steel cabinet feet can't be bought properly, so we can only order aluminum feet.

38. Just install a light at the corner of the aisle, which is bright and effective.

39. I didn't consider the position of the dining table when I installed the lamp. Now the light is not in the middle of the table.

40. Don't use bathroom tiles in Tai Su. First, it is easy to get dirty, and second, it is too dull after a long time!

4 1. More sockets should be installed, furniture should be bought outside, the floor should be dirt-resistant and safe, the model rooms should be seen more, and the principle should be adhered to.

42. There is no need to buy high-priced aluminum gusset plates, and no matter how much money you spend, you won't see significant results. Pay special attention to the keel rather than the aluminum gusset itself when buying aluminum gusset plates (the goal of aluminum gusset plates is too big to be easily tampered with), and ghosts often end up on the keel.

43. It was difficult to find a floor tile with a satisfactory color, so I didn't find it. However, two unsatisfactory colors can be staggered and then turned at a 45-degree angle to achieve satisfactory results. This is a good suggestion put forward by the bricklayer himself.

44. If you hit the cabinet on the top of the balcony, add a layer of foam plastic board behind the cabinet, which has a very good heat insulation and waterproof effect. It is best to use fire-proof boards for balcony doors. The environment of the balcony is relatively poor.

45. If there is no suitable wood thread, it may be customized. The customized quality seems to be better than the sample. And customization is more personalized.

46. Stainless steel feet used in bathroom cabinets are profiteering, and it is very cheap to find some places on the back of the store.

47. When installing the door lock, you should pay attention to some wax on the lock tongue. If it is damaged, it will be too late to wax it. If there is no door suction, pay attention to prevent the handle from hitting the wall and being damaged.

48.Paco floor is very good. I like it. The only thing to remind is that it may be better to talk about the price directly with the boss than with the salesperson.

49. matte paint is just more beautiful than highlights.

50. If redecorated, finished putty will be chosen instead of talcum powder.

5 1. The installation of leakage protector and air switch junction box cannot be omitted, and it should be placed indoors, not outdoors. I wanted to save money by using the old junction box outside the door. The electrician suggested putting it indoors for a new one, but now I think his suggestion is very valuable.

52. Leakage protectors and air switches should be famous brands. I used "Mei Lan Ri Lan". It's easy to buy the real thing. Just make a phone call to check the telephone number of Meilan Rilan headquarters, and then make a phone call to ask the telephone number of the local branch.

53. The basin under the stage is more exquisite, beautiful and easy to clean than the basin on the stage. Pay attention to the faucet under the platform. Considering the thickness of the basin edge, the faucet mouth should be longer.

54. The top corner of the wall is beautiful, without any decoration, but when looking for a painter, you should clearly ask the painter in advance. The top corner line helps to straighten the top corner line.

55. It is very important to treat the surface of the cement surface of the wire trough before putty is approved, and it is more appropriate to treat the weak surface with a cleaning ball.

Gypsum is suitable for filling big holes in the wall. Of course, if the hole is too big, cement is needed.

57. Be sure to protect the paint on the back of frosted glass, which is difficult to clean!

58. The faucet of the vegetable basin must be turned on and off with the back of your hand. It is not easy to keep clean with your fingers, and it is difficult to turn with oil on your hands.

59. The price of luxury automatic clothes hangers is too high. After comparison, it is found that some unknown brands are better than the first-line brands in structural design, but their prices are much lower.

60. Consider using a metal socket installed on the ground. This kind of socket 100 yuan, but it is very convenient. Usually flush with the ground, you can pop up when you step on it. Suitable for living room. Or put it under the dining table and insert hot pot (to prevent hanging wires when walking back and forth).

6 1. Storage room. TX mentioned it, but I didn't make a cupboard door, which looks not very beautiful, and the cupboard where clothes are put is also easy to get dirty.

62. The starting frame of the bed (is that what it is called? I bought a cloth bed from a professional bed company, and I spent 350 yuan to add this thing. When you pull the handle at the end of the bed, the bed board will turn up, exposing the storage space below. Great!

63. Unpractical double-knife towel rack! At present, as with single pole use, towels are basically not hung on the inner pole.

64. I don't think the trash can in the cupboard is practical. It's better to put it outside. In addition, do not install door trash cans and countertop trash cans. Opening the cupboard door in summer will stink. You'd better put the trash can outside.

65. The small cupboard near the dining table is nice, and it is convenient to put something.

66. Personally, the performance requirements of mop bucket are not high. You can build one by yourself, laying tiles or mosaics to match the surrounding environment, which is both beautiful and economical.

67. The bathroom can be nailed with hooks for hanging things.

68. The bathroom is designed with a small cupboard for clothes, so you don't have to worry about forgetting to take clean clothes when taking a shower.

69. The belt drying of washing machine is seriously unrealistic, except for the only yellow mildew day in a year. Thick clothes and bath towels are still wet, just let the sun sterilize them. I'm overdrawn and need to deposit some money.

70. I made a laundry pool in the laundry room to wash some things by hand. I thought I used it less, so I bought a cheap terry faucet. I didn't expect this washbasin to be so convenient that it became the most commonly used washroom in my home. What rags, socks and floor towels are all washed inside, and even hand washing is mostly there.

7 1. Lighting strips are really not practical. It hasn't been opened since the renovation. The guests came, just showing off the spotlight. I forgot to install this thing myself. I wanted to have a romantic party, but now there are not many opportunities to turn on the spotlights.

72. The biggest lesson is that the simpler the decoration, the better, less pollution, less money and peace of mind.

73. Practical things: ① A reasonably designed storage room. (2) The sink on the north balcony. It is different from the washbasin in the bathroom and the bucket for washing vegetables and dishes in the kitchen. (3) You can pull the faucet to wash your hair in the bathroom. TX, who never washes her hair in the basin, is an exception. (4) Easy-to-clean floor and suitable cleaning tools. (5) Kitchen countertop work light.

74. When you buy a toilet, you must measure your hole spacing. Otherwise, it really is ...

75. It is best to measure the elevation of the kitchen floor tiles before they are dried to see if the lowest point is a floor drain, or if they are squabbled with the decoration team after drying, many cells will die.

76. The nacrite of the Great Wall used for the window sill is made of 800X800 tiles. Manufacturers cut and grind the edges, and masons stick them together. Nice pattern. It hasn't radiated yet.

77. The shower room in the bathroom must be large enough to use transparent glass, so that bathing in it will not be cramped.

78. Tile jointing should not use white cement jointing. In less than a month, it turned into a black seam, which was ugly. As a result, I bought a sealant and hooked it myself. I'm so tired.

79. There should be a backboard under the artificial stone in the cupboard. Results It was found after installation. Now I dare not cut meat on it. I promised to fix it for almost two months, but I haven't installed it yet (I only polished it once).

80. Don't believe the designer's bewitch. Of course, you can visit several decoration companies and extract something really useful from each design. The key is what you want to dress up as.

8 1. If the original developer of the floor drain has installed the deodorizing "bowl", never take it out.

82. Try the water after the tile on the bathroom floor is pasted, and rework it as soon as the running water slows down. The running water in my house was very slow, and my heart softened at that time. There is always a little water in the shower now, which makes the shower nozzle of our main defender idle for hundreds of dollars. Now I've been thinking about how to remedy it.

83. When installing the wash basin, we should consider the relative position with the mirror, the shelf for putting the toothbrush cup and the towel rack.

84. When buying a mirror, you should consider the position of the mirror headlights. If you don't want to install the reflector headlight for the time being, the size of the reflector should be able to cover the reserved line of the reflector headlight.

85. Make a small cabinet on the balcony where the washing machine is placed, which is convenient for putting some washing powder and other sundries. It is both beautiful and practical.

86 .. Be sure to keep an eye on the upstairs for waterproofing, or it will drip down upstairs and make the hanging cabinets and walls a mess. .........

87. Don't blindly follow the trend of online group buying. Later, it was found that some people would bargain cheaper than group buying.

88. There must be more sockets on the TV background wall. Once the TV and DVD are installed, you will find that the socket is not enough.

89. Before changing the waterway, it is necessary to consider the details of the washbasin installed in the future, such as whether it is the left basin or the right basin, and where the inlet and outlet should be located. Otherwise, after changing it, I found that the washbasin of the photo could not hold it!

As for curtains, you'd better keep a copy of that size for yourself and explain to the boss that we can't reduce the size. If it's gone, what's going on? Or watch him cut the cloth himself.

9 1. Decoration construction process:

1, enter the site and tear down the wall to build it.

2. Do a 24-hour closed water test on the bathroom and kitchen floor (the developer needs to complete this task).

3. Trenching, hydropower transformation and acceptance.

4. Buried trunking concealed hydropower renovation project, and waterproof project will be started when there is no leakage in closed water test.

5, bathroom, kitchen wall disk.

6, carpentry comes into play, hanging smallpox, plaster Angle line.

7, door cover, window cover. Make a wooden cabinet frame.

8. At the same time, make all kinds of wooden doors, modeling doors and flat pressing.

9. Brush the board with dust-proof paint (clear oil).

10, leveling and laying of marble countertops on windowsill.

1 1, veneer, thread, hardcover.

12, wall foundation treatment, polishing and leveling.

13, the joints of furniture and doors should be glued (edged).

14, wall oil ICI at least three times.

15, furniture paint enters the site, and the paint is patched.

16, corner treatment, floor tiles, solid wood or composite wood floors, waterproof marble strips, and skirting lines.

17, installation and debugging of lamps, sanitary wares, handles and door locks.

18, cleaning, floor tile joint repair, return.

19, preliminary acceptance within the decoration company.

20。 Three parties make an appointment for formal acceptance and deliver it to the owner.

First of all, check-in procedures: Generally speaking, check-in procedures need the original and photocopy of the ID card of the person in charge of the decoration team, the original and photocopy of the owner's ID card, the copy of the business license of the decoration company, the copy of the construction permit of the decoration company and the decoration deposit. Of course, before going through the formalities, you need to specifically ask your management office.

Next is knocking on the wall: after knocking on the wall, the garbage is cleared, and the clay figurine is going to enter the field. The knocking area can be calculated according to the floor plan of the house, which has all kinds of detailed data of your house. Remember to knock on the wall first, and you should know that knocking on the wall is calculated by area.

Masons are mainly responsible for building walls, plastering, repairing, tiling, waterproofing, leveling the ground and installing floor drains. Cement mortar is used for wall building and plastering, and the difference is only in different proportions. Building walls and plastering are the preliminary work of plasterers. After these two items are finished, the plasterer's union will first measure the actual area of the building wall and plastering, and then he will re-measure these dimensions with the owner. In addition, it is best to stick the tiles alone. If it is done by two people, the effect may be different because of different styles. It is best to use joint filler for joint filling of ceramic tiles. The white cement in my house has turned yellow in some places. Masons should pay attention: river sand should be used for decoration.

After the plasterer builds the wall and before plastering, the plumber also enters the site to carry out hydropower transformation. Hydropower transformation mainly includes hydropower positioning, slotting, pipe burying and threading. Although slotting is not important, it indirectly affects the quality of pipe burying and threading.

The first step of hydropower transformation is hydropower positioning, which is to determine the position of switch socket and waterway interface in the whole house according to your needs. The plumber should draw the line between the outlet pipe and the electric wire on the wall according to the faucet position of the switch socket, that is, arrange the lines well. Remember to ask your decoration team for the water and electricity diagram, and let the plumber explain the route direction to you according to the diagram. Don't be afraid of trouble, the plumber will certainly meet your requirements. If you don't sign after the hydropower transformation, the plumber can't get it from the decoration team leader.

After hydropower positioning, the next step is to make a trough. The grooves made by good beauticians are basically straight lines, and there are basically no bristles on the edges of the grooves. Note that before slotting, be sure to ask the plumber to mark all the hydropower trends on the wall, and remember to compare them with the hydropower map to see if they are consistent.

There are several points to be noted about hydropower transformation: 1. It is best to indicate the brand of wire used in circuit transformation in the contract. 2, the switch of the whole house should be basically in the same horizontal position. 3. The sockets in the whole house should be in the same horizontal position as far as possible, except for special sockets such as air conditioners and refrigerators and those with special requirements. 4. The colors of phase line and zero line in circuit transformation should be the same in every room. If possible, it is best to indicate the colors of live wire, zero wire and control wire in the contract, and the protection wire is yellow-green. 5. It is best to use 3 wires with more than 4.0 strands for socket wires (including air-conditioned refrigerators) and 2 wires with more than 2.5 strands for lighting wires. 6. The bottom box is buried underground. If possible, you'd better buy the bottom box yourself. Please report the installation fee to the decoration team. 7. As for audio cable, if you are not a professional enthusiast, it is best not to install audio cable: the housing area in Shenzhen is basically around 100 square meter, and the living room area is generally not very large. Ordinary people really don't need to install sound effects in such an area. Air traffic control is also silver.

With regard to waterway reconstruction, I think it is necessary to say: regarding the issue of boiling hot water, in terms of the weather in Shenzhen, do washbasins and kitchen sinks need boiling hot water? If you need hot water, just turn on the water heater. When decorating, I only sigh that it is so easy to make money and spend money!

Finally, it should be noted that it is best to indicate in the contract that carpenters must enter the site after the completion of hydropower transformation. The advantage of this is that you don't have to pay attention to two things at the same time. Hydropower transformation is a very important expenditure in decoration, and it is also a large part of the profit of decoration company. Moreover, the hydropower transformation is very hidden. If carpenters enter the site at the same time, it will distract you from the hydropower transformation. When the waterway is rebuilt, pay attention to the cleanliness of the surrounding area. When signing a waterway reconstruction contract, it is best to indicate the materials used for waterway reconstruction. In addition, attention should be paid to the size of the original sewer in waterway reconstruction, and the pipes connected with the original sewer in the house should be matched with the original sewer.

In the circuit transformation, attention should be paid to where the lamps in the whole house are installed in advance to determine the position of the switch socket, and at the same time, attention should be paid to the different prices of newly buried wires and replaced wires. It is best to buy a wireless doorbell when buying a doorbell.

After the hydropower transformation is completed, carpenters will enter the site, and carpenters should pay attention to: 1. When you get the designer's drawings, you'd better check the dimensions carefully yourself before signing. 2. The ownership of woodworking tools such as toolbox, workbench and air compressor belongs to the decoration team leader or decoration company. 3. Before the carpentry comes into play, the plate is advanced. Take a closer look at whether the board entering the site meets the contract and is genuine. Remember to find a termite company to prevent termites.

Like plumbers, carpentry is also a big source of profit for the decoration team. The source of formaldehyde in decoration is large. To control this, in addition to the board to comply with national environmental laws and regulations, the wood paint used should also be selected. I'll mention this later.

Painters should enter the site to approve putty after Plaster workers approves the dry mortar wall, which is the first stage of painting mentioned in the schedule. If there is a plaster line, it should be installed at this time. It is the painter's business to install plaster lines. Remember not to use 107 batch of putty. According to my neighbor upstairs, 107 will slowly release a gas harmful to human body, so it has been until now.

If the decoration is painted on one bottom and two sides, it must be polished three times. The first grinding is before the putty is approved and the first primer is applied. After the putty is approved, the dried wall surface must be sanded. The first wall can be sanded with lower grade sandpaper, such as 360 #; The second grinding is before the primer is applied and the top coat is thoroughly applied. At this time, it is best to use sandpaper higher than the sandpaper polished for the first time, such as sandpaper above 400 #; The third time is before finishing the first coating and thoroughly brushing the second coating. At this time, it is necessary to polish the wall with high-grade sandpaper, and it is best to polish the wall with sandpaper above 600 #. Only in this way can the wall painting effect be guaranteed. Otherwise, nine times out of ten, your wall will feel like flour after painting.

Another question to ask is the problem of adding water to paint. Each coating has certain restrictions on the proportion of water added, so it is necessary to pay attention to the construction in strict accordance with the construction instructions.

92. Before the valve of the flue is put back, it must be cleaned to ensure that the valve plate can be opened and closed freely and can be opened to the maximum, otherwise it will affect the smoke exhaust effect of the range hood. When installing the ceiling, you can leave two pieces unattended, and then install the ceiling after the range hood is installed and tested correctly.

93. The living room and dining room have such a large space that the ceiling can be omitted.

94. When wiring, you should think about the location of the air conditioner and move the power supply as close as possible to the air conditioner, so as not to see a power cord when installing the air conditioner, leaving a trace of regret.

95. Measure and record the usable size of the house by yourself. You can overwrite the dimensions on the floor plan and mark them again. The final size will directly affect the decoration design and the purchase of furniture.

96. If you choose black walnut for a small apartment with poor light, it is always not atmospheric enough. At this time, you need to make a choice, or follow the reality or stick to your own ideas. Of course, it is best to do both.

97. Start looking for decorators. As far as personal experience is concerned, it seems more cost-effective to find guerrillas if it is not a particularly large apartment and intends to simply decorate it. It's best if someone introduces you after you install it, and you read it yourself and agree, especially the feelings of the person in charge of the decoration are more important. Sense of responsibility and appreciation level are more critical, because if it is just plain clothes, in fact, almost everyone who lives outside will do it, but the quality depends on the sense of responsibility.

98. It is best to look at main furniture such as sofas, wardrobes, dining tables and chairs, and cabinets. In advance. If you run around, you will be too tired. You can find several large home squares with good shopping environment, and the basic trend will be seen. So what you have to do next is to slowly screen out the right things according to your expected style. Some people have a good grasp of style, while others have a good grasp of color. It doesn't matter. There's still time to think about it anyway. If you wait until the decoration is cleared, it is inevitable that you will reluctantly accept the furniture instead of liking it very much.

99. It's best to write down the furniture size that you are already optimistic about, and then go to the room to simulate the future furnishings.

100. You must keep the necessary documents when you buy something, which is absolutely beneficial to the possible return later. Especially the shopping receipts and brochures of some important items, because many things are guaranteed, it will be more troublesome to lose the vouchers.