What are the computer matching steps of Honda crv throttle?

Computer matching steps of Honda crv throttle in Pacific Auto Network: Start the engine to make it reach normal working temperature; Check the throttle idle speed of Honda CRV; Turn off the ignition switch and wait at least 10 second; Start the engine and run at idle speed for at least 30 seconds; Pull out the harness connector of the throttle position sensor (brown) and reconnect it within 5 seconds; Finally, wait another 20 seconds to finish.

Computer matching must be done when cleaning the throttle valve, because the cleaning of the throttle valve must be due to the blockage of the trachea. At this time, the computer cleans the throttle valve according to some relevant matching of the blocked trachea, and the relevant computer matching must be done. Otherwise, it does not meet.

Throttle maintenance method:

The reason of throttle scaling mainly comes from oil vapor, followed by particles and moisture in the air, that is to say, using qualified air filter and removing crankcase ventilation pipe, throttle scaling will be much slower.

The crankshaft is built in the crankcase, and the lower part is connected with the oil bottom. The working temperature of this part is 100? ~ 180? About.

(Photo/Text/Photo: Pacific Auto Network Li Caiying)