How to match the background speed of Dongfeng Nissan Sylphy washing throttle! urgent ...

Turn: DIY collocation method after Xuanyi DIY cleaning the throttle.

1. Preheat the engine to normal operating temperature.

2. Turn the ignition switch (key) to the OFF position, turn off the engine and wait at least 10 second.

3. Turn the ignition switch to the on position without stepping on the accelerator, and wait for 3 seconds.

Quickly repeat the following 5 and 6 operations 5 times in 4.5 seconds (actually, fully press and release the accelerator pedal 5 times in 5 seconds).

5. Fully depress the accelerator pedal.

6. Loosen the accelerator pedal completely.

7. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and then lights up.

8. After the 8.MIL lights up, completely release the accelerator pedal for 3 seconds.

9. Start the engine and let it idle for a period of time.

Matching is how to step on the accelerator without hurting the car when there is no car. The key is to grasp the time and try it several times to succeed.