Where is the accelerator of Reiz in 2006?

The position of the throttle valve is behind the air filter element of the intake system and in front of the intake manifold. Throttle is the throat of the engine, which can control the air intake of the engine. When the driver steps on the accelerator pedal, he actually does not directly control the fuel injection quantity, but controls the opening of the accelerator. When the throttle opening becomes larger, the sensor will command the fuel injection system to increase the fuel injection quantity after detecting the increase of air entering the engine. All automobile engines are using electronic throttles. The reason why the crankcase ventilation pipe is connected to the throttle valve is the requirement of environmental protection on the one hand, and the gas is pumped out of the crankcase by using the negative pressure of intake air on the other hand. When the oily steam reaches the intake pipe, it becomes cold, and the oil inside will condense on the intake and throttle valve, and then the carbon deposited in the steam will also deposit in these parts. Because the air flow is the largest in the gap where the throttle valve is opened, the space is small and the gas temperature is low, this part is the easiest to condense. Therefore, how long the throttle will be dirty depends on the quality of the air filter, the brand and quality of the engine oil, the condition of the driving section, the temperature, the working temperature of the engine, driving habits and so on.