What is the solution to burning engine oil?

Basically, the solution to burning engine oil is to repair the engine, clean up the carbon deposit in the engine and replace the damaged parts, such as removing the engine cover and replacing the valve oil seal. If the situation is serious, the engine needs to be overhauled, so the phenomenon of burning engine oil should be dealt with in time. The reasons for burning engine oil in automobiles are as follows: 1. Poor valve sealing: The valve is designed to prevent engine oil from leaking into the combustion chamber, but with the increase of service life, it will wear and age, making the valve sealing poor and making the engine oil easily enter the combustion chamber; 2. The piston clearance becomes larger: if the piston runs for a long time, there will be carbon deposition on the piston and a certain degree of wear. With the passage of time, the piston clearance becomes larger, and the oil enters the combustion chamber more easily. This is also often said, the vehicle used for a long time, it is necessary to replace the oil with higher viscosity; 3. The viscosity of engine oil is too small: if the viscosity of engine oil is too small, the phenomenon of burning engine oil will also occur. When the viscosity of engine oil is too small, it has good fluidity and is easy to escape into the cylinder and then participate in combustion; 4. Too much oil: If the oil pressure is too high, part of the oil will be pressed into the cylinder, causing the oil to burn.