Why can fuel additives remove carbon deposit principle piba?

This is the comparison of the cleaning effect of fuel additives.

Can fuel additives remove carbon deposits? Formation of colloid and carbon deposit

In the process of storage and transportation, fuel oil is easy to undergo oxidation reaction and generate colloidal substances. According to the solubility of gasoline, these colloidal substances can be divided into soluble substances and insoluble substances. Insoluble matter, also known as sediment, will stick to the fuel filter when it is added to the automobile fuel tank with fuel, blocking the filter medium, reducing the oil supply, insufficient oil delivery, poor fuel atomization, diluting the combustible mixture and reducing the power and economy of the engine.

After the soluble matter enters the combustion chamber and burns with gasoline, a large amount of hard carbon deposits will be formed in the intake valve, piston crown, piston ring groove, combustion chamber, spark plug and other parts, which will cause the valve to be closed loosely, the engine performance will be degraded, and a series of faults such as poor acceleration, unstable idle speed, stall, jitter and knocking will occur.

When the engine is working, the fuel or lubricating oil entering the combustion chamber cannot burn 100%. Under the catalysis of high temperature and oxygen, some unburned fuel oil forms hydrochloric acid and resinous colloid, which adheres to the surface of parts, and then further concentrates into a complex mixture of asphaltene and oil coke under the action of high temperature, which is called carbon deposition.

When the vehicle is running, it is very common to cause faults due to colloid in fuel and carbon deposit formed after combustion. Although the fault is small, it is extremely harmful.

Hazards of Carbon Deposition With carbon deposition on the cylinder head, the cooling effect of the engine will be reduced. The power and economy of the engine are greatly reduced. Carbon deposition on the top of the piston will form many hot surfaces, which will lead to premature combustion and deflagration and shorten the service life of the engine. Carbon deposition on the valve working face and its seat ring will lead to air leakage due to lax valve closure, difficult engine starting, weak work and easy valve ablation. Carbon and rubber deposits on the valve guide and valve stem will accelerate the wear of the valve guide and valve stem, and even cause the valve stem to move in the valve guide and get stuck.

Carbon deposition in piston ring groove will reduce the side clearance and back clearance of piston ring, or even no clearance; Causes the piston ring to lose elasticity in cementation, and even causes the piston ring to break and pull the cylinder. The carbon deposit on the fuel injector can easily block the fuel injector, leading to engine cylinder running or sudden flameout. Carbon deposition in the nozzle of the precombustion chamber will block the nozzle and make it difficult to start the engine. Too much carbon deposit in the spark plug is equivalent to the shunt resistance between the spark plug electrodes after the fuel is wet, which leads to the leakage of the spark plug and does not work.

How to remove colloid and carbon deposit

In order to eliminate these faults, it is necessary to remove the carbon deposit and colloid in gasoline, but at present, many auto repair shops generally adopt the method of disassembling the engine and cleaning it. This method is not only time-consuming, laborious and expensive, but also unsatisfactory. It is also impossible to remove the glue in the fuel tank and the fuel tank, and it is not suitable for the engine of the current car. Because the current automobile engines are assembled in a constant temperature, dust-free and ultra-quiet environment according to strict technological requirements. If it is disassembled and cleaned and reassembled, its power and sealing performance cannot be compared with the original performance.

Now you don't have to worry too much, because all you need to do is add a certain proportion of fuel system cleaning protective agent to the fuel tank, which can solve various problems caused by carbon deposition. Fuel system cleaning protectants include gasoline and diesel general products, special products for EFI vehicles and special products for gasoline engines, which can automatically remove hard carbon deposits during driving, make the engine performance return to normal, completely remove carbon deposits and enjoy driving pleasure again.

After using this product to remove carbon deposits, the gasoline filter should be replaced. Because the colloidal substances and deposits in the oil tank and oil pipe are gathered here, if they are not replaced in time, the oil supply may be blocked.

Siyoupu fuel additive is a clean way to dissolve the carbon deposit colloid to clean the engine and the carbon deposit injector colloid. The dissolved carbon deposit can be removed from the three-way catalytic converter smoothly without clogging, which is the biggest advantage that ordinary additives can only remove the carbon deposit colloid but cannot dissolve it. If it only dissolves, it will hinder the three-way catalysis and still cause harm to the car. It is best to refuel with Siyou Shop.