What is the matching method of Honda crv throttle?

1. Turn the ignition switch to the on position. 2. Turn the ignition switch to the O FF position and wait 10 second. 3. Confirm that the water temperature is normal. 4. Turn off the ignition switch 10 second. 5. Make sure that the accelerator pedal is completely released, turn the ignition switch to the on position and wait for 3 seconds. 6. Press and release the accelerator pedal 5 times within 5 seconds, and keep it for 20 seconds. 7. Start the engine and let it idle for a period of time.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. There are two kinds of throttles: traditional cable throttle and electronic throttle. The traditional engine throttle control mechanism works by pulling a cable (soft steel wire) or a pull rod. One end of the cable is connected with the accelerator pedal, and the other end is connected with the accelerator linkage plate. The electronic throttle mainly uses the throttle position sensor to control the throttle opening according to the energy required by the engine, so as to adjust the intake air.

During the long-term use of the engine, carbon deposits will inevitably accumulate around the throttle. Dirty throttle will affect ECU's control of throttle opening, and then affect idle speed, causing jitter and other problems. More seriously, if a carbon step is formed, the throttle will get stuck, which may lead to further failure and flameout. So the throttle should be cleaned about 20 thousand kilometers.

(Photo/Text/Photo: Li Shuiqing) @20 19