Air pressure reset method of Buick Angkewei tire

1. Stop: 1. First, drive the car to a safe parking place, and make sure that the car has turned off, and carefully pull down the brakes.

2. Open the door and make sure it is closed.

Second, the reset step:

1. Pull out the fastening screw of elecTPMS battery and take the battery out of the base.

2. Reinstall the battery to the base, manually tighten the battery fastening screw, and complete the reset after charging the battery.

3. Remove the elecTPMS transceiver, open the back shell with thumb and forefinger, take out the battery, and replace it with a new battery to complete the reset.

4. Reinstall the transceiver to the original position of the vehicle, and be sure to tighten the positioning screw to make the transceiver in a stable state.

Verb (abbreviation for verb) description:

1. The tire pressure reset of ingram micro Zhe Ke Angkewei automobile should be carried out in full accordance with the "reset steps" to ensure that the tire pressure detector can resume normal operation after reset.

2. When replacing the battery, the battery requirements recommended by the original factory should be selected to ensure that the internal battery of the tire pressure detection system can work normally.

3. After the reset is completed, don't forget to check the tire condition to ensure wheel balance, integrity and good performance.

Million car purchase subsidy