Audi A6L2.5 solenoid valve is broken.

< strong > Audi A6L2.5 solenoid valve is damaged due to the following reasons:

Causes and solutions for damage of solenoid valve: the connector of solenoid valve is loose or falls off, so the solenoid valve cannot be energized, so the connector can be tightened. If the solenoid coil is burnt out, you can remove the wiring of the solenoid valve and measure it with a multimeter. If the circuit is open, the solenoid coil is burnt out. The solenoid valve is stuck. It is easy to get stuck when there are mechanical impurities or too little lubricating oil. The fundamental solution is to remove the solenoid valve, take out the valve core and valve core sleeve, and clean it with CCI4, so that the valve core can move flexibly in the valve sleeve. During disassembly, attention should be paid to the assembly sequence and external wiring position of each component for correct assembly and wiring. Also check whether the injection hole of the oil mist injector is blocked and whether the lubricating oil is sufficient. Solution to the damage of solenoid valve: If the solenoid valve itself is faulty, replace the solenoid valve directly. There is a virtual connection in the connector, so please fasten the connector. If the line is open, it needs to be repaired.