How to adjust the valve of Honda Lingpai?

The following is about "How to adjust the valve of Honda Lingpai?" Related introduction:

Honda Lingpai valve adjustment method is as follows:

1. Adopt two-step adjustment method: firstly, put the piston of the cylinder at the compression end point, and then adjust the intake and exhaust valves of the cylinder;

2, according to the principle of "two into three rows". That is, the intake valve of the second cylinder and the exhaust valve of the third cylinder must be completely closed at this time, and the adjustment can also be checked;

3. Two cylinders with connecting rod axes on the same plane can only adjust one pair of valves at a time, so the exhaust valve of the fifth cylinder and the intake valve of the fourth cylinder can of course be checked and adjusted at this time;

4. Turn the flywheel 360 degrees to make the six-cylinder piston in the compression end position, and then the remaining valves that have not been checked and adjusted will be completely closed; Therefore, all valves of the engine can be checked and adjusted by rotating the crankshaft twice.