How to disassemble the intake pipe of hacker?

The hacker's air intake pipe is disassembled as follows.

The throttle valve is removed, but the wire of the throttle valve will not be removed. The throttle valve has hardly been cleaned with wire. In addition, the sleeve telescopic rod is required to remove the air cleaner element. I only have a small flying sleeve, and I can't reach the screws. It took me a long time to get it.

The 13mm sleeve should be used for the intake manifold, but Xiao Fei is useless. One of the screws won't work, so we have to give it up. The engine foot leaked oil, so he wanted to change it himself. Buy engine feet, and at the same time, buy suitable sleeves. The throttle line is plug wire, just unplug it, and then connect the antifreeze hose, which is also unplugged.

Vehicle appearance

The front face of hacker is a masterpiece of Nissan tradition. Although it is not big, it gives people a heavy feeling. The chrome-plated logo in the wide net and radiator grille makes people recognize its lineage at a glance. On the other hand, the hood has two arched protrusions, and with irregular headlights, the front face looks like a cute cartoon shape.

The lines of the hacker's car are very tense, and an arc waistline on the side is close to the lower edge of the side window, extending from the front of the car to the taillights, outlining a strong lower limb line. The wide body below the waistline and the thrown wheel arch create a solid SUV posture.