The correct way to step on the gas pedal

The correct way to step on the gas pedal

First of all, we must master the correct pedaling posture.

The operation of the accelerator pedal should be based on the right heel stepping on the cab floor as the fulcrum, and the sole of the foot lightly stepping on the accelerator pedal, stepping down or relaxing with the extension and flexion of the ankle joint. When stepping on the accelerator pedal, the force should be gentle, so that you can step on it gently and lift it slowly.

Second, step on the gas pedal when going up and down the slope

When the car goes uphill, it is not allowed to step on the accelerator. When using low gear, it is generally appropriate to step on the accelerator half. When the car goes down the slope, it is not allowed to step on the accelerator pedal to the end. If you press the accelerator pedal for 3/4 while the car is driving, and the engine still can't increase the speed accordingly, you should shift to a lower gear, and then press the accelerator pedal to accelerate.

Step on the accelerator when starting the car.

When starting the engine, don't step on the accelerator pedal to the end, just slightly higher than the idle accelerator. When starting, it is best to refuel just before the clutch linkage point, and the throttle opening should be medium or small. Loosening the clutch should be closely coordinated with stepping on the accelerator, and the action should be agile.

Fourth, step on the accelerator while driving.

When the vehicle is running, the accelerator should be increased or decreased according to the road conditions and actual needs. The selected gear should be suitable, so that the engine can run at medium speed and large throttle most of the time to save fuel. When driving the manual gear, the cooperation between stepping on the clutch and stepping on the accelerator should be coordinated, which requires more practice according to your own vehicle situation.