How to put away the seat tube inflator of Dahang folding bicycle after use?

The steps of putting away the seat tube inflator of Dahang folding bicycle after use are as follows:

1. First, slowly retract the air nozzle hose of the seat tube inflator into the inflator.

2. Then, rotate the storage cover of the seat tube inflator to the end of the inflator to avoid the damage caused by the air nozzle hose slipping out of the inflator.

3. Then put the seat tube inflator into the vertical tube of the folding car, adjust the height first, and then lock and fasten the quick release pull rod of the seat tube. You can ride on the road normally, and it will affect riding if it is unstable.

4. The brand's patented seat tube pump generally has built-in gas nozzles at both ends, and there are two kinds of gas nozzles: American nozzle and French nozzle. The pump is hidden in the bicycle seat tube, and the tire can be inflated in time if it is short of air.

Extended data:

How to use the pump:

1. When using the pump, connect its air outlet pipe to the valve of the bicycle tire. The function of this valve is to only allow air to enter the tire from the pump, but not allow air to flow back from the tire to the pump.

2. The new pump with sliding outer tube is the simplest one-way valve. When the outer tube is lifted, air enters the air pump from the small hole in the middle sleeve at the lower end of the outer tube. At this time, press the handle, and the air will enter the inner tube of the air pump through the one-way valve at the top of the inner tube, and enter the valve of the tire along the rubber tube.