What happened when Peugeot 4008 started in situ and suddenly turned off?

Cause of sudden flameout of Peugeot 4008 when it started in situ: 1, ignition system failure; 2. The throttle valve is too dirty or the air inlet has too much carbon deposit; 3, less fuel tank, low oil pressure of oil pump; 4, ignition wire leakage; 5. One or more nozzles are blocked; 6. The engine is out of order.

Many common causes of fire are caused by improper operation, such as running out of oil, running out of electricity and wrong gear. These situations are quite common. It may be because the headlights are not turned off for a long time or the battery life expires, resulting in power loss. Replace the battery in time. In addition, install xenon headlights, high-power audio, DVD, etc. It is also the cause of vehicle circuit failure. It's easy to check whether the car is dead. Just honk the horn. When the automatic transmission starts, the gear must be placed in the P gear or the N gear. If you put it in R or D, it won't catch fire. There are also some manual gears that won't catch fire without stepping on the clutch.

If there is no fire, first check whether the battery is fully charged. Insufficient battery power is a common problem that causes the vehicle to fail to start. If the power is sufficient, it is necessary to remove the spark plug to see if there are any traces of the spark plug being soaked by oil. If it is normal, check whether there is high pressure; If you pass the above inspection and find no problems, you need to go to the 4S shop for maintenance. You may need to clean the throttle and fuel nozzle, and also need to test the sensor.

(Photo/Text/Photo: Ask and Answer Animals) @20 19