How to match the escape throttle

There are three ways to match the escape throttle. See the following analysis for details:

1. Manual matching;

For the cable throttle, it can be matched manually after replacing the throttle. When the key of the ignition switch is turned on and off for many times, the on-board computer will delete the memory of the crude oil door, store the data of the new throttle, hit the vehicle, and the vehicle will run normally to complete the matching.

2. Power failure matching;

After replacing the throttle, you can disconnect the negative electrode of the battery and wait for one minute before installing it. In this process, the original memory of the on-board computer will be erased, the factory settings will be restored, and the vehicle will start to run normally, which means that the matching is successful.

3. Matching of diagnostic instruments;

After changing the throttle, you can match it with a special diagnostic instrument for automobiles. After entering the system, select the action test, click the adaptive short circuit to return to zero, and do this several times in a row, then start the vehicle, indicating that the matching is successful.

No matter which method you choose, it is best to go to a professional 4S shop to find maintenance personnel to operate, and don't blindly test yourself. If the vehicle is lost, it will not be worth the loss.