What are the characteristics of oscillating cylinder?

The thrust and tension on the piston rod are determined according to the force required for the work, so when selecting the cylinder, the output force of the cylinder should be slightly to the left. If the cylinder diameter is small and the output force is not enough, the cylinder cannot work normally; However, the excessive cylinder diameter not only makes the equipment cumbersome and costly, but also increases gas consumption and wastes energy. When designing the fixture, the booster should be used as much as possible to reduce the size of the standard cylinder manufacturer.

The characteristics of rack-and-pinion swing cylinder are as follows:

1, the rack-and-pinion oscillating cylinder is small in size, novel in structure and good in performance;

2. Gear rack transmission is adopted to output large and small torques, without oil supply lubrication and exhaust pollution.

3. The rack-and-pinion swing cylinder has an angle fine-tuning mechanism, which can realize accurate angle.

4. A magnetic switch can be installed, and the swing angle range can be adjusted at will.

5. The rack-and-pinion swing cylinder is equipped with an adjustable buffer mechanism, which has no impact at the end of the swing stroke, various installation forms, convenient installation and wide application.

If you want to know more about cylinders, you can visit Wuxi SMART, which specializes in producing cylinders, focusing on 10 years.