How to Adjust the Valve Height of Honda 2.3 Reverse Gear

1. First, the engine must be cooled below room temperature and all valves must be closed.

2. Use manual or automatic air compressor to place the pressure in the cylinder at TDC position.

3. If the camshaft is installed correctly, the valve adjustment can continue.

4. For each valve, measure the lateral clearance between the valve and the rocker arm with vernier caliper.

5. If the lateral clearance of the valve or the lateral clearance of the rocker arm is too large or too small, slight step-by-step adjustment should be adopted to gradually increase or decrease the gasket to achieve the appropriate clearance value.