Three parameters of spray gun

1. Connect the air pipe of f75 spray gun first, so that compressed air can enter the spray gun.

2. Adjust the air pressure value of f75 spray gun to 0.45-0.5 MPa.

3. Add the diluent into the coating in proportion and stir evenly. If there are impurities in the paint, it needs to be filtered first.

4. First pour the paint into the tank, then manually tighten the fog width screw clockwise, and then adjust the metering screw clockwise according to the demand, so that the paint reserve will be reduced and adjusted to the most suitable position, and painting can begin.