Mercedes benz c can't get to 60 Mega.

The reason why the automobile can't step on the accelerator is that the accelerator position sensor is too dirty or the voltage is unbalanced, the accelerator pedal is faulty, the automobile oil system is blocked, and the ignition system is faulty. The oil system of the engine is also very important. If inferior gasoline is added, it is likely to lead to gasoline pump burning, three-way catalytic failure, piston failure and so on. , directly affect the engine power, easy to cause engine stall acceleration.

What is the reason why the car can't step on the accelerator?

It can be judged that there is something wrong with the accelerator pedal of the car, because when stepping on the accelerator, the cable will drive the accelerator, that is, the accelerator, and there is a position sensor on the accelerator. The control unit knows the throttle opening according to the signal of the throttle position sensor, and then calculates the corresponding signal voltage.

Finally, the fuel injection quantity of the vehicle is calculated according to the signal pressure. Therefore, if the throttle position sensor is too dirty or the voltage is unbalanced, the electronic throttle will fail and the speed of the throttle will not go up. If the fault of electronic throttle is eliminated, we should turn our attention to the intake system, oil circuit and ignition system of the engine. If any part of a system fails or is abnormal, it may lead to the situation that the accelerator of the car cannot step on the speed.

In fact, the throttle position sensor signal is a member of the air intake system, and the engine needs enough air for normal operation. The air intake system leaks or is blocked, the power drops when the car refuels, the speed can't go up, and the body shakes.