How to adjust KIA k3 low beam screw?

Pacific Auto Network adjusts the height of Kia k3 low beam. First, open the hood and use a Phillips screwdriver. There are two adjusting screw holes behind the headlights, one is to adjust the light level, and the other is to adjust the light left and right. Just aim the vehicle at the wall, turn on the headlights and adjust it to the right height.

Kia k3 lamp is generally adjusted in the cab, and the height is adjusted by manual adjustment switch, and there are adjustment screws behind the headlights. Adjusting the position of the lamp is realized by adjusting the adjusting knob at the corresponding position behind the headlight.

The parts that need to be adjusted and the tools used are different for different models, which need to be determined according to specific models. Before adjustment, hit the lamp on the wall first, and then observe whether the lamp is offset, too high or too low.

Height adjustment method of KIA k3 low beam lamp:

1. First, open the engine cover and find the adjustment button for adjusting the headlight angle at the position of the headlight lamp holder. Plastic hexagonal design is usually adopted, which can be adjusted by using a hexagonal wrench with corresponding caliber. Some models also use a cross or flat screwdriver for adjustment.

2. Taking an ordinary car as a reference, if the license plate of the front car is installed in the trunk instead of the rear bumper, when the distance between cars is more than two meters, the upper edge of the lamp light should not shine on the other car's license plate. The upper edge of the low beam lamp is just the same as the upper edge of the car wheel, and it is also a relatively standard lamp height.

3. If the low beam light shines on the license plate of the front car (the license plate is installed in the trunk), the light is too high.