How to disassemble Skoda Ming Rui air filter and Ming Rui air filter?

Steps for disassembly, installation and replacement of Skoda Ming Rui air filter: Open the engine compartment cover, support it with a bracket, and prepare gloves, towels and a Phillips screwdriver. The air cleaner cartridge 1 has 9 screws, which need to be completely loosened. Be careful not to drop the screws into the engine room during disassembly! After all the screws are loosened, unplug the hose. ? Then remove the air filter shell and wipe the inside of the air filter box with a clean towel! Then install a new air filter element, connect the rubber hose just now, and then tighten the screws just removed. When tightening the screw, touch around the shell with your hand to check whether it is flat and tight!

Automobile air intake is as important as human breathing, and air filter element is a very important filter in this link. The filter elements of various cars are different, but their functions are exactly the same. The engine needs gas for ignition. The gas first enters the intake pipe from the outside of the vehicle, then passes through the air filter element, then passes through the throttle valve through the air flow sensor, and finally enters the engine for combustion. However, the air filter element is particularly important. Some large dust particles or pieces of paper outside the car need to be filtered through the air filter element, and the air flow sensor is responsible for sending the air to the next link. The throttle valve controls the intake flow, and the accelerator pedal is directly controlled. Finally, the mixed air and gasoline are synthesized and burned in the engine.