How to use changan cs95 cruise control? Schematic diagram of changan cs95 cruise control.

How to use changan cs95 Cruise: Turn on the switch on the left side of the steering wheel to drive. Constant speed cruise needs more than 40/h to work, and+-means acceleration and deceleration. When the speed exceeds 40/h, press the switch and the system will start to work. If you dial up, it will speed up and then slow down. When you step on the brake, the speed will automatically reach the set speed. CRUISE CONTROL SYSTEM (CCS), also known as cruise control device, speed control system, automatic driving system, etc. Its function is: after turning on the switch at the speed required by the driver, it can automatically maintain the speed without stepping on the accelerator, so that the vehicle can run at a fixed speed. With this device, the driver does not need to control the accelerator pedal after driving on expressway for a long time, which reduces fatigue, unnecessary speed change and saves fuel. Due to the development of automobile technology, more and more cable throttle control methods are quickly replaced by electronic throttle control methods. Cable-stayed constant speed cruise is mainly composed of control switch, control module (cruise computer) server (mechanical actuator). The working principle of the cruise control system is simply that the cruise control module reads the pulse signal sent by the vehicle speed sensor and compares it with the set speed, so as to send instructions to the servo to mechanically adjust the increase or decrease of the throttle opening to keep the vehicle at the set speed all the time.